- Joined
- Mar 28, 2010
- Messages
- 10,073
- Reaction score
- 2,697
- Points
- 113
- Location
- Liverpool/Southport. N west
Do these measurements mean a beginner like me doesn't need to make these exact settings of 0.40mm and 0.45mm.
I'm looking for a reliable bit of fun, not 5bhp more at the risk of making precision mistakes.
View attachment 166133
As long as you have the top slightly tighter than the 2nd you’ll be good to put them in at say 0.35 and 0.4
You just have to be careful with worn cylinders, hence having to measure top, middle and bottom of the bore.
Too big a gap may result in excessive blow by, too small and it might wear the rings excessively for lack of room for thermal expansion, and still create blow by.
Sent from my iPhone using Tapatalk