Can someone please help me... Rear arches bouncing off of rim

[CorrDogg58]

The fitment on my rear arches is around 2 inches away from the rim. Where I'm running stretched tyres and coilovers near enough all the way down, every time I go over a dip in the road it's leaving marks. My rims now look as if I've curbed the hell out of them both sides. Is there anything I can adjust to stop these hitting together??? Someone has said something about stuffer rear shocks, but I don't get it

 

[GGG_666]

What suspension are you running? Most coilovers have a progressive spring rate, meaning they get stiffer as they compress. There are brands of coilovers with a set spring rate so they are stiffer. I've changed mine from H&R premium performance to BC Racing with upgraded 10K springs.

 

[CorrDogg58]

Only running FK street coilovers.
Is there anyway to stiffen up the rear to stop this happening, without spending big money on better coilovers?

 

[GGG_666]

only way would be getting spings with a set spring rate

*edit
check out swift springs

also, I'm not all knowing about this so maybe someone else will comment as well

 

[nluk100]

Why don't you try raising the ride height slightly?

 

[Furkz]

can you put up pictures of the arches, front, side and back view im sure we can give a more in depth answer than

 

[hades-]

what you can use if you can get them in the springs are

spring stops alot of caravan ppl use them like a bump stop they are and wont let the body go down as much

Car Caravan Towing Coil Spring Raiser Assistor Spacer PAIR PO4 26-38MM | eBay

like these