Ideally yes if you want to benefit fully from gains of exhaust plus intake but if you still in modding season then no do all the other bit and bobs for stage 2 or 2plus and then map onceCould anyone help me out and tell me if I would need to get a remap running a full Valvetronic exhaust system with a ramair induction kit?
Thanks mate much appreciatedIdeally yes if you want to benefit fully from gains of exhaust plus intake but if you still in modding season then no do all the other bit and bobs for stage 2 or 2plus and then map once
Although if car has decated exhaust then yes you will need it mapped
Sent from my SM-N976B using Tapatalk
Thanks for taking the time to write this. This is a massive help mate! CheersI'm running a BCS Powervalve 100 cell race cat and full Cold Air Intake, also with a Stage2 intercooler with some other mods with no remap as I'm waiting for my booking at R-Tech for Stage2+ and have been getting all the pre-requisite upgrades done in advance. Runs totally fine and is producing about 30bhp over stock (around 295 currently) just because of the improved airflow. Absolutely no issues whatsoever, been running this setup for approx 12 months.
@e9_mustii is absolutely correct though that you won't see any real power gains until you get the ECU remapped for it. If you're going Stage2/2+ then have a look around on here, there are plenty of threads with full specs of what you'll need, but briefly:
Stage2 Minimum Spec:
- Intake/induction kit
- TBE exhaust or downpipe at minimum, sport or race cat recommended (or decat, needs map)
- High Pressure Fuel Pump (or Auto-Tech internals) with 136bar RSV Fuel Pressure Return Valve
- Miller's Nanodrive 5w40 NT+ Oil
- 97-99 RON Fuel - Shell vPower, BP Ultimate or Tesco Momentum
Optional but recommended extra include:
- Stage2 Airtec/Wagner Front Mounted Intercooler (optional, but is the main difference between Stage2 (upto 340bhp) and Stage2+ (upto 380/90 bhp and alot more torque)
- Iridium NGK BKR7EIX Spark Plugs
- Injector Service and Walnut Blast / Decoke
- Clutch/DMF upgrade if manual or DSG Remap
- Brakes, Suspension upgrades
@phateuk has hit the nail staright on the head and beat me to it lol very well written mateThanks for taking the time to write this. This is a massive help mate! Cheers
Will the 100 CELL race cat fit mine though? It’s a dual exhaust not twin 4?Thanks for taking the time to write this. This is a massive help mate! Cheers
@phateuk has hit the nail staright on the head and beat me to it lol very well written mate
My s3 is currently on a stage 1 (probably the highest recorded lol 325bhp with a revo induction kit alone ive installed the stage 2 airtec I/C and will be having the full trackslage decat put in on saturday
But wont be mapping it untill ive put inall the other bits and pieces :
HPFP
RS4 RETURN VALVE
plus walnut blast
Will also ve going to r tech on 7th of october
Sent from my SM-N976B using Tapatalk
Just 2 tail pipes on the left side of the rear?Dual exhausts as in two tail pipes on the left side of the rear, as opposed to split exhaust with tailpipes/dual pipes on opposite sides of the rear?
Nice man may have to get one of those to be on the safe side. I’ll probably go for the WRC. Is there much difference between the race cat and standard 76mm or 90mm? Nearly £400 for race cat I’m seeing lolYeah that's standard. It's a single exhaust all the way from the turbo to the backbox at which point it becomes two tail pipes. The cat is at the opposite end just after the downpipe from the turbo.
Here are the BCS exhausts available for the S3 8p:
They have 3 sound levels for their full TBE systems:
- Prestige - Dual silencers
- Sport - Single Silencer
- WRC - No silencers
All have the same downpipe options (72 or 90mm) sport or race cat (200 Vs 100 cell) and the same backbox and valve system.
I've got the WRC which is the loudest and when off boost its barely louder than stock really, but on full boost when it becomes a full 3" straight through exhaust it's absolutely savage.
Had mine 12 months and only had the EML come on twice in the last few weeks for the Cat efficiency and both times I was pottering about on the motorway at 50mph in cool weather, essentially the cat wasn't hot enough to be at full efficiency. I've got a cheap OBDII scanner in all the time hooked up to my Xtrons Android Head Unit and I can simply check and clear the code on the fly in the Torque app and it's off again. Got my first MOT with it next week and my garage - the local German Specialists have said they have no concerns it'll pass as long as it's warm/hot.
Oh and it's all totally street legal as long as it's declared on your insurance - I'm with the excellent Greenlight with all my mods declared and no issues whatsoever.