aftermarket aerial adapter connection help required if possible chaps.

[Charlie Farley]

I am about to do my new head unit retro fit but wanted to be clear on the aerial connection .
My old concert 2 head had the double fakra plug but my new alpine has normal iso plug as such my fitting kit came with the appropriate aerial adapter lead , connnects2 CT27AA14 , now that's a single fakra plug with a blue lead which I assume is to power the aerial booster, but i'm not 100% clear on where that blue wire should be connected.
the alpine has a blue/white wire ( Remote turn on) and a blue (power antenna ) wire but manual says not use these, so where do I hook up the blue wire if those are not correct.
any input would be very good this evening chaps.

rob

 

[SDHA4SLine]

Wish I knew what the fakra you were talking about

 

[Charlie Farley]

wish I did too steve.....someone must though.

 

[Charlie Farley]

I should have said , fakra to DIN , not ISO..but still has the blue lead that need connecting to something.

 

[David Withers]

Have you tried it out with it disconnected?

 

[tony mc]

My android unit was like that Rob, same arial connector, i had to buy one of these,

http://pages.ebay.com/link/?nav=item.view&id=231409983992&alt=weband

i put the blue wire from that to the blue wire on the stereo and it works fine for me

 

[Jasesapphy]

Stereo blue wire is powered with stereo on so should be fine to connect