09 - Central ElectronicsLong Coding Helper:
Byte 0
Bit 3 - Daytime Running Lights (Scandinavia) active - (DRLs plus tailights)Byte 3
Bit 4 - Daytime Running Lights (North America) active - (DRLs only)
Bit 5 - Assistance Driving Light _Leaving Home active - (Note 1)
Bit 7 - Coming Home active - (Note 1)
Bit 5 - Teardrop Wiping for Rear Window active - (Single delayed extra wipe after rear wash/wipe)Byte 5
Headlight Washer Delay - (? x 50 = delay (ms))Byte 8
Bit 7 - Daytime Running Light (DRL) Deactivation while Blinking active - (Turns off or dims (8P3) the DRL whilst indicating)
Cheers, I did see that but was wondering if it's possible to have them at max brightness when just the sidelights are on?
Why the hell would you want it on full brightness when using your turn signals? Don't you think other drivers might not see your turn signals and possibly result in an accident? Bad idea IMHO
Why the hell would you want it on full brightness when using your turn signals? Don't you think other drivers might not see your turn signals and possibly result in an accident? Bad idea IMHO
I've had mine set like this because I thought it looked a bit silly dimming when indicating, a bit like the DRLs weren't getting enough power when the indicator was on! And I think you can see them just fine. It's been like this a year and no one's crashed into me yet! lol *touch wood*
Hi I've retrofit these light on my 55. Any way on Vag com where u can switch the drl on when you lock/unlock car with the fob, thanks
Hi I've retrofit these light on my 55. Any way on Vag com where u can switch the drl on when you lock/unlock car with the fob, thanks
YesHi guys,
Anyone know if the brightness on the LED DRL's can be adjusted with VCDS/VAGCOM?
I'd prefer it if they didn't dim when the sidelights are turned on or when the indicators are on.
Cheers
Is this to get the drl to remain 100% in park light position?Yes
09 Cent Elect
Coding
long coding helper
Byte 24
bit 0 to 6 DRL Dimming decimal value % 92 *1 = 92%
bit 7 DRL as postion lights checked
change the number to 100
it is a number x 1% = brightnes percet
eg 100 x 1% = 100%
retick bit 7 box again
if you want your rear lights with the drls add 1 to the byte 18 bit 7
eg my TT is 58 LED drls BiZennon i change it to 59
i now have all side lights with DR
You need to change the digit on the top line long coding as there is no option with the helper
use vcds 10.3 but I use the new VCDS 11.2 download
Thanks for the reply but everyone on all the forum chats seem to be missing the exact request everyone is asking for (the question is not to adjust the drl brightness) we know that can be done.. the question is can they not automatically dimm when the selector is moved to Park position ?? Everyone on this forum give opinions and solutions to different questions but no one can assist with the actual question purposed (frustrating)Check out the picture
CAN THE BRIGHTNESS REMAIN AT 100% when the light selector is moved to the “park/side light position” on an 2011 Audi S3 8p ?? That is the question that no one can seem to answe LOL