Remaps agen sorry

big_mo · May 7, 2009

I am looking to get a remap for my car i have settled for a Custom Code stage 1 as Storm recommended.
I have a KO3s already and i have changed bits like
the DV plus the cold side kit
BMC CDA
Forge TIP
Forge turbo and water pipes
NGK spark plugs from the BAM TT/S3 engines
And also have a cat back stealth exhaust from power flow

Is it worth changing the injectors to S3 ones is well?

ash_pearce · May 7, 2009

Not sure about injectors mate there seems to be mixed responses on here and other forum that the injectors are not a straight swap. What engine code are you running? What do custom code say about the injectors?

ash_pearce · May 7, 2009

ah.. found your other post seems you have a aum not agu like mine, i think from what i remember reading that the injectors will fit. not sure what benifits though, heres a link to injector flows if you have the part numbers to hand check what flow rate yours are compared with the s3 ones http://www.fuelinjector.citymaker.com/page/page/4782443.htm

S3 IRL · May 7, 2009

Bam injectors flow 398cc per min @ 3bar. they will fit but the ecu will have to be scaled correctly to suit, if not it will run pig rich. I ran a set in my old passat (awt) 150bhp engine. But I was using GIAC sortware which specfied 380cc or bam injectors. Bosch part no 0280156063

Custom-Code HQ · May 9, 2009

big_mo said:
I am looking to get a remap for my car i have settled for a Custom Code stage 1 as Storm recommended.
I have a KO3s already and i have changed bits like
the DV plus the cold side kit
BMC CDA
Forge TIP
Forge turbo and water pipes
NGK spark plugs from the BAM TT/S3 engines
And also have a cat back stealth exhaust from power flow

Is it worth changing the injectors to S3 ones is well?

Good choice in both software and agent

The modifications you have on the vehicle are a good base for the Phase 1 Custom-Code although with the addition of FMIC,Downpipe and sports cat you will be set for Phase 2 software which will see upto 230-240bhp from your vehicle.

The stock injectors will be more than adequate for the Phase 1 or Phase 2 software that you are looking at running.

Any more information is available upon request

Leigh

Remaps agen sorry

big_mo

MOSES

ash_pearce

Member

ash_pearce

Member

S3 IRL

Registered User

Custom-Code HQ

Registered User

Similar threads