For Sale OZ Ultraleggera HLT 19” Wheels w/ Michellin PS4S tyres

[CHRS3]

OZ Ultraleggera wheels 2x 19x8” ET45 / 2x 19x8.5” ET47 in gloss black. Specced similar to OEM RS3 wheels however I ran them with spacers. Spigot rings included. May fit other models, I bought these to fit my RS3 and have been on for the last 3 years. They were ceramic coated at new however this has worn off due to temps/time etc. car got professionally valeted every 2 weeks so they have been kept as clean as possible to avoid damage.

Originally fitted with Pirelli p zero tyres matching factory 255front/235rear offset but have had a set of 235 Michelin pilot sport 4 S tyres fitted on all wheels last year which have covered probably less than 3000 miles. These tyres have never had a puncture, car was aligned when they were fitted so will have even tyre wear and pressures always set correct. I will measure all tyre depths in the next few days when I get time and upload some fresh photos as the photo uploaded is from when I first got them. Invoice posted to show specs.

Buying these new now will cost £2500 just for the wheels and another £7/800 for the tyres. I’m looking for £1900 collected as I no longer have the original boxes they came in to post.

Please remember these photo are from when I first got them new and are just for reference, I will take fresh photos in the coming days with tyre depths.

Thanks,
Chris


Sent from my iPhone using Tapatalk

 

[CHRS3]

Price for wheels/tyres if ordered from same place I got them from, save yourself some £££.

 

[CHRS3]

Finally took them off the car and measured tyre depths with some photos. Will take a better close up of each wheel when I give them a fresh clean as they had been sitting on the car for a while unmoved and gathered some dirt.

Passenger front inside 6.75
Middle 7
Outside 7

Drivers front inside 6.75
Middle 6.75
Outside 7

Drivers rear inside 7
Middle 7.25
Outside 7.25

Passenger rear inside 7
Middle 7.25
Outside 7.25

The digital part of the gauge is broken so please use the left side of the scale on the top which is in mm. Depths are estimates to the scale however I have went to the next 0.25mm down if I’m not sure to be realistic.

 

[CHRS3]

Bump £1800


Sent from my iPhone using Tapatalk

 

[CHRS3]

Bump