RSQ3 Wheel Torque

Sort by date Sort by votes
Generally 120-130 for almost all vag cars, but if unsure can goto 140, it's not going to cause an issue, I've had to undo nuts that were way over 200 cause some numpty decided to stand on the nuts lol.

As discussed recently I do add a little grease on mine to keep the rust at bay.
 
  • Like
Reactions: LYRAC
Upvote 0 Downvote
NHN said:
Generally 120-130 for almost all vag cars, but if unsure can goto 140, it's not going to cause an issue, I've had to undo nuts that were way over 200 cause some numpty decided to stand on the nuts lol.

As discussed recently I do add a little grease on mine to keep the rust at bay.
Click to expand...
From memory on the Q3 it’s 140. It’s usually listed in the mobility section of the owners manual
 
Upvote 0 Downvote
ee876a035ff48c09fa7b76703409d8a1.png



Sent from my iPhone using Tapatalk
 
Upvote 0 Downvote
NHN said:
Generally 120-130 for almost all vag cars, but if unsure can goto 140, it's not going to cause an issue, I've had to undo nuts that were way over 200 cause some numpty decided to stand on the nuts lol.

As discussed recently I do add a little grease on mine to keep the rust at bay.
Click to expand...
Thank you for your time and reply.
 
Upvote 0 Downvote
Lol such an odd forum this is at times.

Literally posted the page above from the Q3 manual…….

No thanks, kiss my bum or nothing.


Sent from my iPhone using Tapatalk
 
  • Like
Reactions: alanyork
Upvote 0 Downvote
You must log in or register to reply here.
Top
Back