Bluetooth wiring

[Egbert]

Hi all,

I have fitted an RNSE mk2 (193) to my A3 8P and want to fit the OEM Bluetooth module. Despite much searching of this and other forums I can not find the pin outs for the bluetooth module. I have the connectors and microphone so I don't really want to go to the expense of buying a loom when I'm capable of making my own. Also my RNS-E is a G (SW 0200, HW H05) so I am guessing SDS is out?

Many thanks in advance.

 

[Egbert]

I've done a lot of digging and I've put together this simple connection guide. Is there anyone who can confirm my thoughts are correct?

 

[hollows wife]

sds can be enabled with hacked software version 0220

 

[Egbert]

I think I may already have SDS enabled...

...in German

 

[hollows wife]

looks like it , you just need to add the wiring for the sds if it isn't already done

 

[Egbert]

OK so from my research the only wiring needed is to route the mic to the RNS-E (mic in) then connect RNS-E (mic out) to Bluetooth Module (mic in).