Epc light problem

[marc464]

Has anyone ever had a error
18047- accelerator position sensor 1/2 (g79/g185) p1639 -35-00 implausible signal
The etc light comes on and goes in to limp mode switch the ignition off then back on and its OK again iv replaced the throttle pedal and checked the wiring to the pedal it is on a 2001 audi s3 8l

 

[<tuffty/>]

Accelerator pedal is most likely faulty

<tuffty/>

 

[marc464]

Iv replaced the throttle pedal though

 

[1wheelonly]

Check measuring blocks for correct readings

 

[marc464]

Do you know which measuring blocks it is

 

[1wheelonly]

Have a look in 063 & 064 mate

 

[1wheelonly]

Also look at block 028