Hello,
has anyone successfully enabled Auxiliary Ventilation with VCDS? I tried to enable it through HVAC module but the following malfunction appears and nothing shows up in multifunction display(advanced menu is enabled). Mine is a MY2008 (pre-facelift), 1.4
Address 08: Auto HVAC Labels: 8P0-820-043.lbl
Part No SW: 8P0 820 043 AG HW: 8P0 820 043 AG
Component: KlimavollautomatH19 0420
Revision: 193390 Serial number: 8P0820043AG
Shop #: WSC 06314 000 00000
VCID: 71E3CB1D68B23B1
1 Fault Found:
01317 - Control Module in Instrument Cluster (J285)
008 - Implausible Signal
Freeze Frame:
Fault Status: 01101000
Fault Priority: 3
Fault Frequency: 2
Reset counter: 28
Mileage: 51758 km
Time Indication: 0
Date: 2015.02.19
Time: 18:16:54
Freeze Frame:
ON
It's a cool feature that does not require an extra module. I know this is part of the Auxiliary Heating option, but the heater is not required for some fresh air!
Thanks!
has anyone successfully enabled Auxiliary Ventilation with VCDS? I tried to enable it through HVAC module but the following malfunction appears and nothing shows up in multifunction display(advanced menu is enabled). Mine is a MY2008 (pre-facelift), 1.4
Address 08: Auto HVAC Labels: 8P0-820-043.lbl
Part No SW: 8P0 820 043 AG HW: 8P0 820 043 AG
Component: KlimavollautomatH19 0420
Revision: 193390 Serial number: 8P0820043AG
Shop #: WSC 06314 000 00000
VCID: 71E3CB1D68B23B1
1 Fault Found:
01317 - Control Module in Instrument Cluster (J285)
008 - Implausible Signal
Freeze Frame:
Fault Status: 01101000
Fault Priority: 3
Fault Frequency: 2
Reset counter: 28
Mileage: 51758 km
Time Indication: 0
Date: 2015.02.19
Time: 18:16:54
Freeze Frame:
ON
It's a cool feature that does not require an extra module. I know this is part of the Auxiliary Heating option, but the heater is not required for some fresh air!
Thanks!