Gunny you mean 115? As mine is the 115, however sharing the same turbo as the 110 I'm guessing it would be the same cat too. Problem is I have no jack anymore and I can't get it on a ramp ATM, tried looking underneath but there's so much underbody protection I can't see **** other than the back and mid box. Think ill take the gamble and get a 3 bolt, everything seems to point to it being a 3 lol.
Hey Tommy, the car was putting out 119bhp and 279nm on the rollers, after the map it makes 151bhp at 2900 and 377nm at 2600, torque doesn't drop below 360nm between 2300-3000 so a nice flat torque curve. 2nd and 3rd are entertaining. Had it done by CC tuning in Burton, highly recommend them. I asked if the torque could be abit higher in the range because it suits my driving style and the clutch, unsure if the map is usually like what I got or they altered I'm not entirely sure. I can get 60+ mpg when driving ecnomoically on a roads pretty easily, im on 45mpg atm raggin it about town. Negative effects..um can't think of any, million times better than stock, not sure about clutch wear as the previous owner changed mine at about 180k something (on 194k) when mapped. My turbo went recently, kept blowing my intercooler, but that was an original which is on 208k now so it did over 10k mapped and Im not sympathetic in my driving lol. It's definitely worth it, I was getting 7.0 dead 30-70 on a flat straight road with a huge boost leak and knackered turbo so I'm expecting it will be low-mid 6s now with a new turbo and decat.