Can anyone tell me how to adjust the washer jets for the windscreen. I know it's a case of fine adjustment with a pin but how on earth do you get to them!! I did a search but didn't come up with anything
Cheers
They are a piece of cake to click out of the bonnet and then you can see the jets clearley.
Just push them downwards slightly towards the Windscreen and pull the top out and pull away from the bonnet. ( done with bonnet up and from under the bonnet over engine)
Dont pull them to far out as they have washer pipe and heating wires attached, but there is enough slack wire to turn them and see h jets.
cheers for the reply I'll have a go at removing them I guess the only issue then is getting the jet in the right place and going back and forth fitting and popping them in and out. At the mo they are just a bit to low although with all the rain might not be worth it
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.