Seat belt fault

[Mike071288]

Bit of advice needed guys, i have fitted mk2 tt seats in my a3 and have fitted the resistors to the aigbags to disable them, but im still getting a fault code coming up for the seat belt switch, is it just a case of turning the warning buzzer sensor off and then resetting the codes or do i have to fit resistor to the seat belt switch too.

Any help would be great.

Mike

 

[Mike071288]

Anyone?

 

[Mike071288]

Bank hols Bump

 

[NHN]

1st of all should wire the airbags up properly instead of using a resistor pack, but you can tell the car it doesnt have seat belt warning fitted with vcds & possibly tell it there arent any seat bags.

This shows coding options for airbag controller version 9.41

http://wiki.ross-tech.com/wiki/index.php/Audi_A3_(8P)_Airbag_9.41#Coding

 

[Mike071288]

Cheers for the help, haven't got vcds though, any chance you can sort it for me?

 

[NHN]

I'm going to be in Staines 1st thing tomorrow to fit cruise for someone, if you want to meet me there, I can try & decode it.

 

[Mike071288]

Cant meet in staines, going to be in work from 5:30 till 15:30, unless you want to come down to Euston and ill sort you out with that heated mirror glass.

 

[NHN]

No can do as got a flight at 5.30pm to Venice, so will be there for an hour at most.