Search results for query: *

Think I should try changing it again? I just tried re-adapting it with no luck, code is still coming back

I have an Audi A4 B7 2tdi 170hp, had the DPF replaced, G450 sensor replaced, EGR valve replaced, and glowplugs replaced around christmas. No fault codes after this, just not recently my cars going into limp mode when stepping on it in 2nd and the fault codes read p0472 and p2002 I believe I...

remap + egr and dpf delete should get you to 170(maybe more)

I've been driving with a clunk/rattle for over a year now going over small bumps, I decided to jack the car up and look for play on all the arms but there were none exept this play on the axle It's very similar to this video I do also have very worn down pads to the point where the caliper is...

I don't want to go as aggressive as this car but I would love the lip to sit flush with the fender(Not completely slammed though) Any suggestions? I'm used to 235/35/19 ET 35 but couldn't really get very low with it, once again i'm not trying to slam the car on the ground

Been checking out wheels and found out that I really like the JR11s and came upon these pictures https://www.flickr.com/photos/127660436@N02/15381072714/in/album-72157649714651801/ 18x9,5 ET 30 Doesn't mention the tire specs and I really want the exact same specs as shown on the picture Could...

Anti rattle clips are on, I would've changed them but I was just looking for a temporary solution till I'm off work (I work on the sea and will be gone for the next couple of weeks) Also, do you know if the EBC greenstuff pads are good?

Here's a little video of how it looks and sounds https://streamable.com/h0sdu Car was recently in a shop to replace wheel bearing where he had to take the breaks off Everything bolt feels like it's on tight

I haven't tried checking the joints/bearing for play but I have noticed that the lower suspension shock bearing looks kinda funky, as if it's been ripped (I'm assuming it might've happened since I didn't tighten it under load... oops)

Mind checking the other thread I created? Included an audio file of what it sounded like when I was braking http://www.audi-sport.net/xf/threads/i-get-this-sound-when-im-braking.369382/ And yes I've been considering getting it all new in the front but haven't looked at the costs yet

Honestly it's hard to say considering your car went into limp mode with only glowplugs showing as being faulty. I've had faulty glowplugs and they've never made it go into limpmode. Think you need to have the car scanned whilst its still in limpmode (Otherwise when you shut the car off it clears...

Little backstory Had the car in a shop yesterday to replace front right wheel bearing(I'm assuming he needed to remove brakes in order to replace the wheel bearing) After getting it back I get this noise when braking https://vocaroo.com/i/s1vghzwmJeFx Any clues? I asked the mechanic and he...

Not necessarily, you should get the car scanned when you still have the glowplugs show up on your dash(When it shows up and you have loss of power it means that your car have gone into limp mode)

I've had a clunk all winter but only when driving on icy/small bumps, not noticeable on normal bumps and it's more of a rumbling sound than clunks Would you suggest that I just buy a new front suspension kit (exept for springs since they're fairly new) edit: Might aswell ask in this thread...

Could be a clogged DPF/EGR Valve, if you have a faulty glowplug your DPF won't regenerate causing it to clog

I have a clunking noise in the frontend of the car, thought I'd try and loosen all of the bolts and retighten them, would I need an alignment after doing this?

Had the same thing only in 4th gear 1500-2000RPM uphill, p0299 underboost and would disappear when restart Replaced EGR Valve and that fixed it

Thanks man, I would've done this ages ago but I just HATE waiting for parts to arrive :laughing:

I just have a fear of it slipping off and me falling on my face :hypnotysed: Have had my fun adjusting rear coilovers on B7s with the wrench slipping and slicing my hand on the sharp thing around the break disc

oof, would you say it'd be easier for a rookie like me to put it in a shop to do it for me? I'm a fairly small guy :culpability: