I've pulled the trigger and got an 80,000 mile B6 S4 therefore this project and most of the equipment fitted is now for sale! Gutted to see it go but I've got big plans for the V8!
Brake tidy up, fitted powdercoated guards, polished star bolts and anti rattle clips whilst off the car. Also gave all the painted surfaces a couple of coats of turtle wax
You can't track the car on the drive-way in the air J_sharples, The toe is always going to change as the suspension leg moves up and down due to the distance between the steering rack and where the track rod meets the leg increasing/decreasing. Before you get new suspension, try letting the...
I have a full grey set of Sport seats and matching door cards to give away in Northampton. Rear door cards are electric window type. - FREE
Also have a standard set of rear pads (new) for 245mm discs. Come new in the box with grease - £10
Got nearly new PCV and injection pump one-way valves -...
QC, really interested in this, steering has never really quite felt right since I had the sump off.
What do you mean though, by factory wheel brace?
Any pics of tool or alignment holes. Seems strange that they'd slot the bolt holes and then use a tool.
Been running the turbo on stock tune and injectors for quite a while now. Albeit with the BEX secondary intercooler, enlarged silicone TIP, panel filter and 2.0T coil packs.
I believe this is very much a plug and play turbo however (obviously) for maximum gains I'd say you're looking at the...
8EO199379AF is left hand non-wired
8E0199379E is right hand wired
Check your left hand mount before removal, if it has the sensor/solenoid wiring present then you need two of the 8E0199379E
I got the R8 coils and instantly felt a smoother curve through the higher rev range but to be fair the coils I removed were ancient.
If you go for the R8/2.0TFSI coil upgrade you need the adapter plates as they're a bit longer (hence the claimed extra punch) and the plates helps locate them...
10mm all round will be fine. I was just giving you the spacing that would fill the arches evenly.
I'm not sure you can get 10mm spacers for our cars actually as I seem to recall trying once, they don't make the hub-centric ones as there wouldn't be enough material left for any strength due to...
Careful where you go for your gkn's, I asked for gkn in GSF's and they tried to fob me off with some rubbish which I checked online and it had terrible reviews for failures. They were called GS-P IIRC
I haven't yet mate. To be honest I'm not looking yet because I don't have time to do all the work for a while.
I've also been offered a company car which I'm seriously considering taking. It would mean taking all the pressure off the B6 which I could then garage and take my time with the...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.