Cars looking great, im looking at up grading my headlights. Either r8 projector or the ones you have fitted ,would you be able to give me a run down on fitting any problems, and how do the lights actualy work. Do the drl strips come on with the ignition. What is the light output is it good.
Any...
Hi mate, you will have to remove the motors from your old lights and fit them in to your new ones. If you do not want to do that there is two white dials that you can manually adjust your lights. If you measure so far up the wall and draw a line not sure of the right height adjustment, this is...
Sorry bud, forget about the plastic cross piece on the bumper, yours does not have it as yours is the facelift bumper, so forget about the vinyl wrap. but i would still paint the radiator and crash bar with heat resistent matt black paint, no need for primer depending on what you use.
Hi bud, did this mod. I have a white quattro, take the bumper back off, spray the crash bar and radiator with matt black heat resistent paint, then use matt black vinyl wrap to the plastic cross piece on the bumper. it then looks factory finnish.have fun
My local radio station had a topic on this the other morning. Ive heard that if you put clean cat litter in a sock, or uncooked rice in a sock on your dashboard this works, never had this problem so never tried this myself. give it a go you have nothing to loose.
Hi BUD, had the same problem on my 2007 quattro last summer, this is a common fault. I tried lubricants etc, etc. but what you need is a new door lock mech. Brandnew 165.00 from tps. then fitting on top.But if your handy go to a scrap yard and get the latest 2012 model a3 for 60.00 and fit the...
Hi i know this mod has been done many times. The question i would like to know can you remove the
plastic centre piece which holds the origanal plate to the bumper. I would like to remove this as my number plate will be customised and will be fitted further down on the grill. As with the 2008...
Anybody have a problem with there rear number plate light (off side only.) I removed the plastic lense cover, bulb ok but noticed a lot of corrosion on the copper plate which makes the contact to the bulb cleaned the contact plates but still no joy. any help advice would be great.:sos:
Cheers Bud,
And thanks again for all your help, removed lower diffuser today, see what you mean about the screws on either side. going to clean the rear end before fitting the new s3 diffuser.
Thanks again Gazza.
Need help with the removal of the lower diffuser from my sline 2007 3 door car, I have purchased a s3 diffuser pre,facelift, painted Ibis white with gloss black diffuser.I have had a good look underneath and it looks like you can un clip the lower part from the main bumper, I would like just to...
Help required
Anybody done this retrofitt kufatek heated seat harness to climate control and fuse box.
I have fitted heated oem heated seat ellements to my leather seats, seats stripped down ellements fitted, seats re assembled.
Kufatec plus oem heated seat looms fitted,what i want to do is...
Need some advice,
could anybody tell me what is the model serial number i should be looking out for which will fit into my car and will operate my heated seats.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.