Wiring new stereo, no rear speakers.

Nigtmareaudio

New Member
Joined
Dec 30, 2021
Messages
19
Reaction score
2
Points
3
Location
Dorset
I'm sorry to start yet another thread but after 5 days of researching trial and error and pulling my hair out I'm no further....

I have a concert eu stereo auz1z4.
With rear ampd speakers.

I wasted plenty of money on harnesses and got nowhere so I'm looking for the info to hardwire.

I believe someone removed the original audi stereo and downgraded to the concert.

I found this video which is the closest I've come but I have a different set of plugs for the amp...
 

Attachments

  • IMG_20211228_161253.jpg
    IMG_20211228_161253.jpg
    658.5 KB · Views: 126
Ok, so what are you trying to do, get the concert working or aftermarket?
 
I've fixed it!

Absolutely brill video , loved the way you have with words lol. But meant to ask did u happen to write down the pin numbers for wires for Green plug and pin number for the wire that the remote goes into . Cheers

Sent from my SM-G970F using Tapatalk
 
  • Like
Reactions: bronco
Could any help me? I've got a concert stereo and my front speakers are working but quiet and the rears are not working. I should mention there is a nokia bluetooth fitted, which i disconnected and tried the stock quadlock in the head unit to see if that was it but no change. Also i did have broken wires in the rubber boot on the drivers door but I've soldered these. Any help would be very much appreciated many thanks JP.