Just one other thought, what software is you RNS-E running? I have 0650.
Im also running 650 software
Just one other thought, what software is you RNS-E running? I have 0650.
And another thought, does your adaptor loom have K Line pin connected.
Hi Alex, the Kline is what is used for connecting to most of the controllers in the A4 B7, its a mix of Kline and Canbus
The Kline pin is listed on the RNS-E pinouts, also I did not realise you were not using VCDS. What are you using?
Still if you say the module was from A4 B7 then it should be coded right, unless the bluetooth was turned off.
Ok Alex, if all looks good then you must use VCDS to access the controler.
My adaptor loom had every pin wired so it was easy when I fitted my rear camera to tap into the reverse pin.
So, what was the outcome then Alex?
I'm going to be messing around with an rns-e and BT fit on sunday, i'll see what occurs in that process and report back if similar probs and resolutions.
Yes, going to give it a go.
my pioneer is not DAB so will have to see what occurs now, don't really listen to radio really, just my cd's .To be honest Rob im really happy with the oem setup, a good map and firmware update will see it working spot on and keeps the dash looking nice and oem.
Im curious to see how you get on with your radio reception too.
Its a MK2 HU so hopefully be ok with the old bus.
May live dangerously and get a rear camera aswell,