Recent content by moogie

Here you go: http://navplus.us

Thanks Dave. I should have mentioned that I have access to ETKA (although you seem to have a newer revision). The problem with ETKA is that it doesn't really show if the 4 airbag units for 06 steering wheels are interchangeable. Or at least I can't see this. It's possible that the changes...

Ok, took some pictures of the old and new if that would make comparing a bit easier: Old one on the left, new one on the right. As can be seen, the new one has the mounting points slightly elevated from the bottom, unlike the old one. Anyone out there able to lend a hand? Pretty please? :)

This may be a bit of an unusual request, but I'd need help with pictures of A3 steering wheels with the airbag removed, and also of the rear side of the airbag itself. These would need to be from the basic steering wheels without any multi-function buttons or DSG paddles. The reason I am...

Power-wise it propably could, but the gear-ratios won't allow for it. I have the APR remap myself, together with Milltek full exhaust. With this setup, I was able to get to ~155mph on the German Autobahns. At this point the car was pulling nearly 6500rpm on 6th gear. :rolleyes: As the power...

The camera was mounted like so. The arm in the picture is actually not mine, it was borrowed, and I bought my own later on. The clamp is Manfrotto SuperClamp, I highly recommend one :thumbsup:

Been awhile since I last posted here, but what the heck, time to fix that :yes: Had a boring Sunday yesterday as I had to find something to do to pass the time while the autums first storms were passing by. This meant that I finally had time to go through some of the in-car footage I've taken...

That's Ahvenisto racetrack, located some 100km outside of Helsinki. I doubt that many of you are familiar with the place I've added more pictures from the trackday into my gallery ( http://moogie.idle.fi/audi/ ).

As summer has finally arrived to the northern parts of the world too, yesterday it was finally time to kick-off the tracking season! Beatiful weather combined with some of the modifications done to the car during the winter made this a very fun day! Here's a teaser pic, more in a few days.

The trim comes out by just carefully pulling it. Have you found a double-din version of the cup holder somewhere? Afaik, the single-din version won't fit, and a double-din version doesn't exist.

One addition to the above thread. If you need to buy a new electronics unit, make sure that you buy one that is compatible with your steering wheel slip ring. I spent quite a few hours trying to figure out why my new module didn't work properly, until it was found that it wasn't compatible.. As...

I've been looking at the S-line spoiler I have, and it looks like the standard brakelight won't fit into it. Does anyone have the partnumber for the S-line brakelight? Could any S-line owner be kind and take a look at theirs? Thanks!

Hi, I just finished replacing my bumpers with the S-line models, and naturally had to change to front fogs at the same time. For some reason Audi has chosen to use a different connector on the standard fogs and the S-line fogs, so I couldn't connect them straight away. If anyone has any idea...

Just took a pic of what the S-line spoiler's bottomside looks like. Link here. Any ideas?

Hi! Anyone know howto replace the original roof spoiler with a S-line model? I've managed to source one S-line spoiler, but can't seem to figure out how it should be mounted. From what I can see by looking at the current spoiler, it seems to be a fixed part of the boot lid - I atleast...