Recent content by dannyboy1985

Yes, one is 12v the other provides the signal.

Yes, just 12v power. I used 3 pin Rc connectors for the inners but you probably need the correct connectors for outers as it is outside.

It’s usually only the base models that need modules as well. The modules you need have 501 at the end of the model Number so you can check yours. This is off memory been a year since I sold mine. The full module numbers are posted on here in a few places.

If you have electric windows all round then you will just need mirrors and inside switch if you choose to fit it. Any mirrors 14ish and above will fit. Don’t know the exact part numbers. Just be sure they have the pink wire in the connectors that’s how you can tell them apart from non-folding.

I used the bumps for the front that came with the kit and trimmed the back about an inch. Just because going over speed humps it was hitting them and making it feel a bit stiff. Any other time though seem fine leaving them.

Mine was pfl I think there are a few that have it working on fl. It’s not working on saloon though. Same coding as in first post if you get codes something hasn’t changed correctly.

Yes, works fine without the button.

If it doesn’t have mag ride as you posted above.. no.

Mine for 30mm front & rear E10-15-021-02-22

I’ve just activated without the button mate.

Question: I’ve done the auto hold on my sportback and works great! My mate has a saloon and we can’t seem to change the transmission in long coding currently 61 not 41. Also, the fault for missing auto hold switch won’t go away even with changing the monitor from 7 to 0 any ideas? Currently...

The last update I got it working with the coding from original post. But without the button you also need 03-abs>adaptions>Monitoring of auto hold switch light changed from 7 to 0. That cures the handbrake fault code.

Update got it now saying auto hold unavailable with 2 codes. First is hold switch light out. Second basic settings missing.

Well I’ve enabled mine without the switch no codes but it’s not working.. any ideas?

I think some of it is German you just have to translate and select the correct one.