Does it matter if the plate makes it look older. Personally I think not. If yoh like it then get it my bro. I was gonna go for s333 yah but didn't get there in timeI’m looking at a private plate and it’s down to s321vrt ( s3.2 1 vrt). Or s30mgu ( s3 omg u) Not sure I think the s321vrt plate just makes the car look older what you think ?
yeah makes sense really as I’d have to get the car trailered somewhere for the downpipe to be done anyway,Custom exhaust realistically dude...
<tuffty/>
View attachment 206739
parked the van in city centre on Monday and came back to this, crafty ***** drilled the door and pulled the cable where the handle is for inside the van, took everything that I didn’t have on site, it’s a company van and contents not covered so I’m down 2k which has come out of the car fund
On the plus side my blue haldex arrived today and a haldex service kit and 3l of g12 just waiting on some distilled water, hope you weathers good I can get some work done on it this week I don’t like the fact the engines been sat empty for so long so want to try n get fluids in it soon
Yes...Would a inline fuel pump be needed aswell as a dw65v at over 500bhp?
Yeah dead locks fitted now since it’s happen I notice loads off vans that have a metal plate welded on to stop it happening,
I got it off a r32 breaker on facebook
I paid 500 but they seem to go for anywhere between £500 and £600 I’m hopefully buying the hpa touchscreen aswell this weekendCan’t go wrong with em need a tracker n all sorts now ! How much did you give for it so I know I’m not having my pants down !
Sent from my iPhone using Tapatalk
Nopes....I’ve seen that does it let you choose how much power you can send to the front or rear
Sent from my iPhone using Tapatalk
Nopes....
Controls haldex clutch engagement... will only ever be 50/50 on full lock at best
<tuffty/>
blue haldex or the HPA controller transforms how it drives tbh...Still good for big power and cornering I guess
Sent from my iPhone using Tapatalk
I used an Ibiza OE filter for years... supported my 620hp ... I now use what is essentially called a Bosch Motorsport filter but in reality is just a Bosch filter that takes fittings...View attachment 208410 Anyone using the aem 380lph inline pump? I’ve ordered dw65v for the intank and I’m thinking of fitting a fuel filter where the carbon canister is when I remove it or screw-in one into the inlet on the fuel rail anyone used these filters?
I used an Ibiza OE filter for years... supported my 620hp ... I now use what is essentially called a Bosch Motorsport filter but in reality is just a Bosch filter that takes fittings...
Have you not read any of my thread? LOL
Bosch part number is 0450905021... should be about 12 quid for the filter but Torques do a kit with the fittings as it uses M14x1.5 and M12x1.5 fittings allowing you to use -6AN fuel line
https://www.ebay.co.uk/itm/Bosch-04...Performance-Fuel-Filter-8-Micron/381571013429
or just the filter...
https://www.ebay.co.uk/itm/BOSCH-0450905021-FUEL-FILTER/293419242109
<tuffty/>
Cheers that a bit cheaper, I have but I couldn’t find it There’s so much good info in there I get distracted,I used an Ibiza OE filter for years... supported my 620hp ... I now use what is essentially called a Bosch Motorsport filter but in reality is just a Bosch filter that takes fittings...
Have you not read any of my thread? LOL
Bosch part number is 0450905021... should be about 12 quid for the filter but Torques do a kit with the fittings as it uses M14x1.5 and M12x1.5 fittings allowing you to use -6AN fuel line
https://www.ebay.co.uk/itm/Bosch-04...Performance-Fuel-Filter-8-Micron/381571013429
or just the filter...
https://www.ebay.co.uk/itm/BOSCH-0450905021-FUEL-FILTER/293419242109
<tuffty/>
in I know I’m all over the place but engine bits will always be available, and luckily I have got pretty much all the external trims new in A cupboard before some became unavailable ,waiting to go on when paints up to scratch, plus now I have them now no more distractionsGlad to see you have the priorities straight LOL
They are nice tbh... I have a set of decent blades waiting in the wings for when I eventually get my body work sorted but those carbon ones do look nice... although I would prob end up just painting them the OE colour anyway lol
<tuffty/>