A5 / A4 B9 - Door warning light retrofit

[Evil Derboy]

As some may know, these cars come with a reflector in the door instead of a proper light.

For those that are interested in the door warning / puddle lights I found a couple of good links. I already have projector puddle lights as standard on my car but added the door warning lights and fitted nice LEDs in there instead of the stock bulbs.

PUDDLE LIGHTS / DOOR WARNING LIGHTS INCLUDED BULBS AND HARNESSES FOR FOUR DOORS:
https://www.ebay.co.uk/itm/Fit-For-...e=STRK:MEBIDX:IT&_trksid=p2057872.m2749.l2649

Above is not OEM parts and from China but work perfectly. (There is a seller on ebay doing an OEM kit but for the door warning light it is £45.00 per door!)

LED PCB FOR DOOR WARNING LIGHTS:
Audi Red door light LED Panel - EM Tuning Automotive Industry

I ended up hacking up the harness and splicing the wires into the puddle light but you can add this harness into pin connector that feeds the door, quite easily if you know what pin to use (You'll get this info on Elsawin or Eriwn - https://erwin.audi.com/erwin/showHome.do)

This is the result:

 

[DarkyUK]

Just ordered the LED panels from this to replace those stupid bulbs with

 

[WesT-gefül]

Just ordered the LED panels from this to replace those stupid bulbs with

Would like it if you took pics of fitting. That would be much appreciated

 

[DarkyUK]

Would like it if you took pics of fitting. That would be much appreciated

I have already added the warning lights, I had the door panels off when I added the Exit Assist warning lights and fitted the folding and camera door mirrors so it made sense to fit them at the same time. I will only be changing the bulbs for the LED modules

 

[mickwillow]

Managed finally to finish making my wiring loom up this weekend and installing my door warning lights, bonus was too that I managed to do it without taking the door panels took about 15 minutes each door

 

[HavanaClub]

Hi Guys

Does anyone have the info as to which number pin on the plugs l'll need to plug into for the puddle lights please?
I've got a kit with wiring, just need to know which pin to plug into on each of the 4 doors.

I've followed the link above onto the erwin page and registered but it doesn't give you the required info.

Thanks

 

[John_A5]

I would like to know the pin numbers too if its possible.
Thanks guys

 

[maday007]

I would like to know the pin numbers too if its possible.
Thanks guys

Hi John, did you find out what pin?