Syvo
IF IN DOUBT GO FLAT OUT
thought i would add my pics of the inlet manifold pipe i made this morning got all the pipes off ebay.
i used a 45 degree elbow and a 90 degree elbow with 1 hose joiner in the middle cost about £20-30 instead of £60 for a forge one also the pipes i have used are 68mm internal diameter which is larger than the standard pipe will have to measure the old one to tell you but when i put them together the was a noticable difference.
there is a slight noticable difference in throttle response not massive but i know its there lol
i used a 45 degree elbow and a 90 degree elbow with 1 hose joiner in the middle cost about £20-30 instead of £60 for a forge one also the pipes i have used are 68mm internal diameter which is larger than the standard pipe will have to measure the old one to tell you but when i put them together the was a noticable difference.
there is a slight noticable difference in throttle response not massive but i know its there lol