bogdan_wst
New Member
Hi to you all!
I have a audi a3 8v 2.0 tdi (crlb engine) made in 07.2015 with bi-xenon and auto lights (no AFS/no cornering lights). My car came with a regular frameless mirror without any function (not even auto dimming).
I bought a mirror from a breakyard and it has the code 8T0857511AD.
I made all the wiring (it is a 7 pin mirror) and i connected as per elsawin (except J533 can connections) this way:
- pin no. 1 to power
- pin no. 2 to ground
- pin no. 3 to Can bus extended high (orange/gray wire in pin no.5 in t17a - low left A Pillar)
- pin no. 8 to Can bus extended low (orange/brown wire in pin no.6 in t17a - low left A Pillar)
I did not connect the rest of the wires yet because i do not have the auto-dimming side mirrors and i did not find any black/blue wire in my front interior light module.
I added the 20 High Beam Assist Module to the 19 Can Gateway and i assured it is "coded" in the instalation list.
I coded the 09 Central Electronics and made the required adaptations as per the on line instructions - when i push once the high beam lever to the front i get the symbol in the cluster as if the HBA is activated and i get no error message in the DIS. If i remove one or both of the can connections, i get an HBA error message in the DIS - so i think the can connections are ok.
Below you have my autoscan file.
The problem is that the HBA system is not working (the auto-dimming feature work fine).
As you can see in the autoscan file, there is no comunication between the Can Gateway and the HBA module and i also can not connect to the HBA module with my genuine hex+can interface. So i can not code anything to it. I drove with the HBA activated (simbol present in the DIS) above 60 km/h and above 100 km/h, but there is no reaction regarding the low/high beam change.
Is there any way to make the HBA to work even if this mirror is not specific to a3 8v? Has anyone managed to do this?
Any kind of help is really appreciated.
Thank you.
I have a audi a3 8v 2.0 tdi (crlb engine) made in 07.2015 with bi-xenon and auto lights (no AFS/no cornering lights). My car came with a regular frameless mirror without any function (not even auto dimming).
I bought a mirror from a breakyard and it has the code 8T0857511AD.
I made all the wiring (it is a 7 pin mirror) and i connected as per elsawin (except J533 can connections) this way:
- pin no. 1 to power
- pin no. 2 to ground
- pin no. 3 to Can bus extended high (orange/gray wire in pin no.5 in t17a - low left A Pillar)
- pin no. 8 to Can bus extended low (orange/brown wire in pin no.6 in t17a - low left A Pillar)
I did not connect the rest of the wires yet because i do not have the auto-dimming side mirrors and i did not find any black/blue wire in my front interior light module.
I added the 20 High Beam Assist Module to the 19 Can Gateway and i assured it is "coded" in the instalation list.
I coded the 09 Central Electronics and made the required adaptations as per the on line instructions - when i push once the high beam lever to the front i get the symbol in the cluster as if the HBA is activated and i get no error message in the DIS. If i remove one or both of the can connections, i get an HBA error message in the DIS - so i think the can connections are ok.
Below you have my autoscan file.
Code:
Tuesday,19,December,2023,16:26:11:08312
VCDS -- Windows Based VAG/VAS Emulator Running on Windows 7 x86
VCDS Version: 23.11.0.0
Data version: 20231027 DS351.0
www.Ross-Tech.com
VIN: WAUZZZ8V1GA016081 License Plate:
Mileage: 209897km-130423mi Repair Order:
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Chassis Type: 8V-AU37 (5Q0)
Scan: 01 02 03 08 09 10 15 16 17 19 20 42 44 52 55 5F BB BC
VIN: WAUZZZ8V1GA016081 Mileage: 209897km-130423miles
01-Engine -- Status: OK 0000
02-Auto Trans -- Status: OK 0000
03-ABS Brakes -- Status: OK 0000
08-Auto HVAC -- Status: OK 0000
09-Cent. Elect. -- Status: OK 0000
10-Park/Steer Assist -- Status: OK 0000
15-Airbags -- Status: OK 0000
16-Steering wheel -- Status: OK 0000
17-Instruments -- Status: OK 0000
19-CAN Gateway -- Status: Malfunction 0010
20-High Beam Assist. -- Status: Cannot be reached 0100
42-Door Elect, Driver -- Status: OK 0000
44-Steering Assist -- Status: OK 0000
52-Door Elect, Pass. -- Status: OK 0000
55-Headlight Range -- Status: OK 0000
5F-Information Electr. -- Status: OK 0000
BB-Door Rear Drv -- Status: OK 0000
BC-Door Rear Pass -- Status: OK 0000
-------------------------------------------------------------------------------
Address 01: Engine (J623-CRLB) Labels:. 04L-907-309-V1.clb
Part No SW: 04L 906 026 BP HW: 04L 907 309 R
Component: R4 2.0l TDI H21 7608
Revision: B5H21--- CVN: 6D420AD2
Coding: 021D0012042401082000
Shop #: WSC 15412 005 1048576
ASAM Dataset: EV_ECM20TDI01104L906026BP 004005
ROD: EV_ECM20TDI01104L906026BP_004.rod
VCID: 79F30228F8F92A5984-802C
VINID: 9D196AAAA22605744004600804A9EE30F0
No fault code found.
Readiness: 0 0 0 0 0
-------------------------------------------------------------------------------
Address 02: Auto Trans (J743) Labels: 0D9-927-770.clb
Part No SW: 0D9 300 041 H HW: 02E 927 770 AQ
Component: DQ250-6F MQB H53 5220
Revision: 06253104 Serial number: TFK01506020435 CVN: 0000802C
Coding: 0014
Shop #: WSC 04742 780 00200
ASAM Dataset: EV_TCMDQ250021 001001
ROD: EV_TCMDQ250021.rod
VCID: 1D3B36B80C91B679C8-8048
2 Faults Found:
10657 - RPM Signal from ECU
P0726 00 [00000010] - Implausible Signal
Intermittent - Not Confirmed - Tested Since Memory Clear
10906 - Cooling Oil Valve
P179D 00 [00000010] - Electrical Malfunction
Intermittent - Not Confirmed - Tested Since Memory Clear
-------------------------------------------------------------------------------
Address 03: ABS Brakes (J104) Labels: 5Q0-907-379-IPB-V1.clb
Part No SW: 3Q0 907 379 K HW: 3Q0 907 379 F
Component: ESC H42 0622
Revision: 00000000 Serial number: 61745000001916
Coding: 12F162A224210A720177060841C4294846245080608294F2026100748208
Shop #: WSC 06314 790 00021
ASAM Dataset: EV_Brake1UDSContiMK100IPB 034036
ROD: EV_Brake1UDSContiMK100IPB_034.rod
VCID: 4281A5C4D5AFA98195-8016
No fault code found.
-------------------------------------------------------------------------------
Address 08: Auto HVAC (E87) Labels:| 8V0-820-043.clb
Part No SW: 8V0 820 043 D HW: 8V0 820 043 D
Component: AC Automat H13 0060
Revision: 20027000 Serial number: 00000000668507
Coding: 03000104002000011000000000001100
Shop #: WSC 06314 790 00021
ASAM Dataset: EV_AirCondiFrontVaAU37X 008020
ROD: EV_AirCondiFrontVaAU37X_008.rod
VCID: 336FF0009A1510090E-8066
Humidity sensor: exterior:
Subsystem 1 - Part No SW: 4H0 907 658 HW: 4H0 907 658
Component: AQ_Hum_Sensor H03 0003
Serial number: 2DD844B7000000000001
No fault code found.
-------------------------------------------------------------------------------
Address 09: Cent. Elect. (J519) Labels:| 5Q0-937-08X-HV1.clb
Part No SW: 5Q0 937 084 AS HW: 5Q0 937 084 AN
Component: BCM MQBAB H H24 0173
Serial number: 01061516302215 Dataset Number: 8V0909514J 0089
Coding: 04041B46C24122FD43844004001C07A8000E000000000000000000000000
Shop #: WSC 06314 790 00021
ASAM Dataset: EV_BCMMQB 015001
ROD: EV_BCMBOSCH_015.rod
VCID: 091372E8A8193AD994-805C
Wiper motor control module:
Subsystem 1 - Part No SW: 8V1 955 119 A HW: 8V1 955 119 Labels: 5QX-955-119-V1.CLB
Component: WWS370 150604 042 0580
Serial number: 150614151742
Coding: 0A47F7
Rain/Light Recognition Sensor:
Subsystem 2 - Part No SW: 8U0 955 559 B HW: 8U0 955 559 B Labels: 8U0-955-559.CLB
Component: G397_RLFS H06 0002
Serial number: 24034272
Coding: 00006C
Light switch:
Subsystem 3 - Part No SW: 8V0 941 531 AE HW: 8V0 941 531 AE
Component: E1 - LDS MQB H05 0032
Serial number: 15 04 2015 00001454
No fault code found.
-------------------------------------------------------------------------------
Address 10: Park/Steer Assist (J446) Labels:| 5Q0-919-283.clb
Part No SW: 5Q0 919 283 F HW: 5Q0 919 283
Component: PARKHILFE 4K H10 0054
Revision: -------- Serial number: 39211516701758 Dataset Number: 8V0909526E 0042
Coding: 0000050011
Shop #: WSC 06314 790 00021
ASAM Dataset: EV_EPHVA14AU3700000 002024
ROD: EV_EPHVA14AU3700000_002_AU37.rod
VCID: 3C7DDB3CB74BDF71DF-8068
No fault code found.
-------------------------------------------------------------------------------
Address 15: Airbags (J234) Labels:| 5Q0-959-655.clb
Part No SW: 5Q0 959 655 N HW: 5Q0 959 655 N
Component: AirbagVW20 012 0361
Serial number: 003M2R0VS7SJ Dataset Number: 8V0909602C 0009
Coding: 98CCC0000C0000005C5400CA004800000065
Shop #: WSC 06314 790 00021
ASAM Dataset: EV_AirbaVW20SMEVW37X 002126
ROD: EV_AirbaVW20SMEVW37X_VW37.rod
VCID: 4B9F88E0E2E568C966-801E
Crash sensor for side airbag: driver side:
Subsystem 1 - Part No SW: ----------- HW: 480 001 906 15
Component: SideSensor_Df 001 0887
Serial number: 3576700000078AD88411
Coding: 2D2D2D
Front Passenger's Side Airbag Crash Sensor:
Subsystem 2 - Part No SW: ----------- HW: 480 001 906 15
Component: SideSensor_Pf 001 0887
Serial number: 3586700000097AD88413
Coding: 2D2D2D
Rear Side Airbag Crash Sensor (on driver's side):
Subsystem 3 - Part No SW: ----------- HW: 480 401 506 15
Component: SideSensor_Dr 001 6149
Serial number: 35165029F1B5A88110DI
Coding: 2D2D2D
Passenger side rear thorax airbag crash sensor:
Subsystem 4 - Part No SW: ----------- HW: 480 401 506 15
Component: SideSensor_Pr 001 6149
Serial number: 3526502A51B5A88402AB
Coding: 2D2D2D
Crash sensor for front airbag: driver side:
Subsystem 5 - Part No SW: ----------- HW: 480 402 705 15
Component: FrontSensor_D 001 6149
Serial number: 3556502C11A14CC20083
Coding: 2D2D2D
Driver's side crash data pedestrian protection:
Subsystem 6 - Part No SW: ----------- HW: 480 401 106 15
Component: PedP_Sensor_D 001 6149
Serial number: 22865029B1B5A880D23K
Coding: 2D2D2D
Passenger's side crash data pedestrian protection:
Subsystem 7 - Part No SW: ----------- HW: 480 401 106 15
Component: PedP_Sensor_P 001 6149
Serial number: 2296502A51B41480C220
Coding: 2D2D2D
Center pedestrian protection crash sensor:
Subsystem 8 - Part No SW: ----------- HW: 480 401 106 15
Component: PedP_Sensor_C 001 6149
Serial number: 2306502A51B41483906.
Coding: 2D2D2D
No fault code found.
-------------------------------------------------------------------------------
Address 16: Steering wheel (J527) Labels:. 5Q0-953-549.clb
Part No SW: 8V0 953 521 EH HW: 5Q0 953 549 E
Component: Lenks. Modul 003 0110
Revision: -------- Serial number: 15061504220076
Coding: A418
Shop #: WSC 06314 790 00021
ASAM Dataset: EV_SMLSKLOMQB 017001
ROD: EV_SMLSKLOMQB_017.rod
VCID: 040D63DC8F3B67B1E7-8050
No ASAM data for: "EV_SMLSKLOMQB" (AU37)
No fault code found.
-------------------------------------------------------------------------------
Address 17: Instruments (J285) Labels:| 5G0-920-XXX-17.clb-SRI3
Part No SW: 8V0 920 871 S HW: 8V0 920 871 S
Component: KOMBI H03 6420
Coding: 07AC09082B8000080000EE001000000000000000
Shop #: WSC 06314 790 00021
ASAM Dataset: EV_DashBoardVDDMQBAB 009046
ROD: EV_DashBoardVDDMQBAB_009_VW26.rod
VCID: 4C9D8BFCE7EB6FF16F-8018
No fault code found.
-------------------------------------------------------------------------------
Address 19: CAN Gateway (J533) Labels:| 5Q0-907-530-V1.clb
Part No SW: 5Q0 907 530 AF HW: 5Q0 907 530 F
Component: GW MQB High 128 1224
Revision: -------- Serial number: 0003618306 Dataset Number: 8V0909515J 0062
Coding: 030100041F0876005B0002481C0B00000001010000000000000000000000
Shop #: WSC 06314 790 00021
GVL: 01543C0000000100400C10000000C80000000000000000000000000000000000
ASAM Dataset: EV_GatewLear 013020
ROD: EV_GatewLear_013.rod
VCID: 75EB0E18D4E14E39E0-8020
Generator:
Multifunction steering wheel control module:
Subsystem 2 - Part No SW: 8U0 951 528 A HW: 8U0 951 528 A
Component: E221 - MFL H02 0014
Serial number: 13 06 2015 E0033255
Battery Monitoring Control Module:
Subsystem 3 - Part No SW: 5Q0 915 181 H HW: 5Q0 915 181 H
Component: J367-BDMConti H02 1011
Serial number: 74185703001506081556
5 Faults Found:
131632 - High Beam Assistant Control Module
U1070 00 [00001001] - No Communication
[New feature! Extended UDS fault detail is only supported by current gen. interfaces]
Confirmed - Tested Since Memory Clear
Freeze Frame:
Fault Priority: 2
Fault Frequency: 1
Reset counter: 122
Mileage: 209879 km
Date: 2023.12.18
Time: 14:52:52
Terminal 30 power supply: 12.0 V
Terminal 15: On
66049 - Powertrain Databus
U0002 00 [00001000] - No Communications
[New feature! Extended UDS fault detail is only supported by current gen. interfaces]
Intermittent - Confirmed - Tested Since Memory Clear
Freeze Frame:
Fault Priority: 2
Fault Frequency: 1
Reset counter: 163
Mileage: 209879 km
Date: 2023.12.18
Time: 15:43:22
Terminal 30 power supply: 12.4 V
Terminal 15: OFF
66050 - Data Bus for Suspension
U10AC 00 [00001000] - No Communications
[New feature! Extended UDS fault detail is only supported by current gen. interfaces]
Intermittent - Confirmed - Tested Since Memory Clear
Freeze Frame:
Fault Priority: 2
Fault Frequency: 1
Reset counter: 163
Mileage: 209879 km
Date: 2023.12.18
Time: 15:43:22
Terminal 30 power supply: 12.4 V
Terminal 15: OFF
66052 - Infotainment CAN Bus (SAE Bus E)
U0065 00 [00001000] - Performance
[New feature! Extended UDS fault detail is only supported by current gen. interfaces]
Intermittent - Confirmed - Tested Since Memory Clear
Freeze Frame:
Fault Priority: 2
Fault Frequency: 1
Reset counter: 166
Mileage: 209897 km
Date: 2023.12.19
Time: 15:48:19
Terminal 30 power supply: 12.3 V
Terminal 15: OFF
8531970 - Quiescent Current
U1406 00 [00001000] - Too High
[New feature! Extended UDS fault detail is only supported by current gen. interfaces]
Intermittent - Confirmed - Tested Since Memory Clear
Freeze Frame:
Fault Priority: 7
Fault Frequency: 1
Reset counter: 163
Mileage: 209882 km
Date: 2023.12.18
Time: 17:51:00
Terminal 30 power supply: 12.4 V
Terminal 15: OFF
-------------------------------------------------------------------------------
Address 20: High Beam Assist.
Cannot be reached
-------------------------------------------------------------------------------
Address 42: Door Elect, Driver (J386) Labels:| 5QX-959-X93-42.clb
Part No SW: 5Q0 959 593 E HW: 5Q0 959 593 B
Component: TSG FS 020 0041
Serial number: 130515BEC10332 Dataset Number: 8V0909872G 0035
Coding: 001C8B204000040000001002
Shop #: WSC 06314 790 00021
ASAM Dataset: EV_DCUDriveSideEWMAXKLO 006003
ROD: EV_DCUDriveSideEWMAXCONT.rod
VCID: 438FA0C0CAB5A0899E-8016
No fault code found.
-------------------------------------------------------------------------------
Address 44: Steering Assist (J500) Labels:| 5Q0-909-144.clb
Part No SW: 5Q0 909 144 R HW: 5Q0 909 144 R
Component: EPS_MQB_ZFLS 125 1061
Dataset Number: 8V0909852K 0022
Coding: 8103
Shop #: WSC 06314 790 00021
ASAM Dataset: EV_SteerAssisMQB 012140
ROD: EV_SteerAssisMQB_012_VW37.rod
VCID: 438FA0C0CAB5A0899E-8016
No fault code found.
-------------------------------------------------------------------------------
Address 52: Door Elect, Pass. (J387) Labels:| 5QX-959-X92-52.clb
Part No SW: 5Q0 959 592 E HW: 5Q0 959 592 B
Component: TSG BFS 020 0041
Serial number: 200515BEK02459 Dataset Number: 8V0909873G 0035
Coding: 001C83204C00040000001002
Shop #: WSC 06314 790 00021
ASAM Dataset: EV_DCUPasseSideEWMAXKLO 006003
ROD: EV_DCUPasseSideEWMAXCONT.rod
VCID: 4281A5C4D5AFA98195-8016
No fault code found.
-------------------------------------------------------------------------------
Address 55: Headlight Range (J431) Labels:| 5Q0-907-357.clb
Part No SW: 5Q0 907 357 HW: 6R0 907 357 A
Component: LWR-ECU 005 0080
Revision: -------- Serial number: -------------- Dataset Number: 8V0909865L 0039
Coding: 019A000001000000
Shop #: WSC 06314 790 00021
ASAM Dataset: EV_HeadlRegulVWLWRMQB 001110
ROD: EV_HeadlRegulVWLWRMQB.rod
VCID: 75EB0E18D4E14E39E0-8020
No fault code found.
-------------------------------------------------------------------------------
Address 5F: Information Electr. (J794) Labels:* None
Part No SW: 8V0 035 043 T HW: 8V0 035 043 D
Component: MU-H-N-EU H45 0397
Serial number: A303F0F7582249 Dataset Number: 8V2909545H 0046
Coding: 01730301FF00000021110001000A00032F00010501000100DE
Shop #: WSC 06314 790 00021
ASAM Dataset: EV_MUHig4CHBAS 001040
ROD: EV_MUHig4CHBAS_AU37.rod
VCID: 4183AAC8D0A9B2998C-8014
Data carrier:
Subsystem 1 - Part No SW: V03 959 800 Q HW: -----------
Component: ECE 2015/2016 --- 0122
Serial number: --------------------
Multimedia System 1:
Subsystem 2 - Part No SW: 8V0 919 604 C HW: 8V0 919 604 C
Component: DU High H49 0014
Serial number: AUZ8Z9FY203G88
Multimedia system control head:
Subsystem 3 - Part No SW: 8V0 919 614 K HW: 8V0 919 614 K
Component: ControlUnit_H H81 0816
Serial number: C1000003041500040108
Compact disc data bank:
Subsystem 4 - Part No SW: V03 959 800 EG HW: -----------
Component: Gracenote --- 1010
Serial number: --------------------
No fault code found.
-------------------------------------------------------------------------------
Address BB: Door Rear Drv (J388) Labels:* None
Part No SW: 5Q0 959 595 E HW: 5Q0 959 595 B
Component: TSG HFS 020 0041
Serial number: 230515BEM17307 Dataset Number: 8V0909897E 0021
Coding: 000C83204000040000001002
Shop #: WSC 06314 790 00021
ASAM Dataset: EV_DCURearDriveMAXKLO 006003
ROD: EV_DCURearDriveMAXCONT.rod
VCID: 458BBED8C4819EB9B0-8010
No fault code found.
-------------------------------------------------------------------------------
Address BC: Door Rear Pass (J389) Labels:* None
Part No SW: 5Q0 959 595 E HW: 5Q0 959 595 B
Component: TSG HBFS 020 0041
Serial number: 230515BEM17302 Dataset Number: 8V0909896E 0021
Coding: 000C83204000040000001002
Shop #: WSC 06314 790 00021
ASAM Dataset: EV_DCURearPasseMAXKLO 006003
ROD: EV_DCURearPasseMAXCONT.rod
VCID: 458BBED8C4819EB9B0-8010
No fault code found.
End-------------------------(Elapsed Time: 06:38)--------------------------
The problem is that the HBA system is not working (the auto-dimming feature work fine).
As you can see in the autoscan file, there is no comunication between the Can Gateway and the HBA module and i also can not connect to the HBA module with my genuine hex+can interface. So i can not code anything to it. I drove with the HBA activated (simbol present in the DIS) above 60 km/h and above 100 km/h, but there is no reaction regarding the low/high beam change.
Is there any way to make the HBA to work even if this mirror is not specific to a3 8v? Has anyone managed to do this?
Any kind of help is really appreciated.
Thank you.