wing removal DIY??

U need to take out the inner plastic arch, then undo the 3 bumper bolts on the front of the wing
There's bolts in the door check too. (Open the door and you'll see them)
Obv the bolts on the too of the wings
Maybe one next the headlight too

Not that hard just take ya time should take no more than about 30mins
 
  • Like
Reactions: rawtor51
Dunno mate
I haven't removed mine
When the inner wheel arch is out you might be able to see if there is any down by the skirt.

Just remove lower bolts first and move up then the wing won't fall on ya head or bend.
Obv loosen the top bolts if you wish too allow some movement.
 
  • Like
Reactions: rawtor51
There is two bolts just behind the skirt, i fitted new wings to mine last summer and one that you have to get behind the inner arch plastic
 
  • Like
Reactions: rawtor51
Cheers Matty.
is there any need to remove the skirt? Possibly 2 bolts at the bottom?
cheers


Just doing this myself today and yes you do have undo the front part of the skirt so you pull it out of the way to access to bolts at the very bottom of the wing
 
  • Like
Reactions: rawtor51
out of interest wheres the best place to get a couple of wings apart from dealers with the prices the charge?
 
Just doing this myself today and yes you do have undo the front part of the skirt so you pull it out of the way to access to bolts at the very bottom of the wing

Thanks buddy. Appreciate the reply. Just need to remove the front section?
is there and bonding adhesive on the skirts to worry about.
cheers.