Will Audi 18" ET 29 SLINE Alloys Fit my B8.5 Quattro

[Anthony566]

Hi can someone please confirm if I can run 8.5Jx18H2 ET29 on my 2013 2.0 Tdi Quattro Black Edition ?

I know the ET on the 18" S Line wheel I have should be ET47 but just want to confirm before I sell what I have just Baugh and find some ET47's

Completely my fault as I didn't check the ET.

Thanks in advance.

 

[MuPPeT_ON_TouR]

Use this calculator to figure out what the differences are. Calc <--- clicky

I think you can run the A4 standard alloys with a 10mm spacer at the front so my initial thoughts are no, but please confirm this using a search and the calculator.

Your new alloys will stick out 18mm more than your old ones. ET 29 compared to 47.

 

[Anthony566]

Use this calculator to figure out what the differences are. Calc <--- clicky

I think you can run the A4 standard alloys with a 10mm spacer at the front so my initial thoughts are no, but please confirm this using a search and the calculator.

Your new alloys will stick out 18mm more than your old ones. ET 29 compared to 47.

Thanks for the help ..... they won't fit .... oops never mind back to the drawing board.

 

[makelja]

Yes they do fit.
I had a set of A5 (8,5x18 et29)wheels on my previous A4 B8 Avant and they were spot on.