I'm interested in removing the wheels from my 2014 S3, so I can give the wheels and arches a thorough detailing. Does anyone have a torque wrench and car jack they could recommend please? Also, what socket size would I need to remove the wheel nuts? Cheers.
Torque wrench and wheel removal recommendations
- Thread starter tebsy
- Start date
Have a look at these FAQs for your jacking requirements:
http://www.audi-sport.net/xf/thread...-on-the-8v-chassis.198794/page-2#post-2309874
http://www.audi-sport.net/xf/thread...-on-the-8v-chassis.198794/page-2#post-2286850
http://www.audi-sport.net/xf/thread...-on-the-8v-chassis.198794/page-2#post-2309874
http://www.audi-sport.net/xf/thread...-on-the-8v-chassis.198794/page-2#post-2286850
Halfords wrenches are good reasonably priced, usually 17 size, just ask them to check for you, the alum race jacks 1.5t are adequate, found on eBay/net easily, Warrior do them & grab a cut out hockey puck from eBay to save any chassis damage underneath, jack points usually marked with arrows on undersides.
Clarke pro impact sockets are good for taking nuts off and have protective cover to stop damage.
https://www.machinemart.co.uk/shop/...GS-040215184&gclid=CNO724em1McCFVdAGwodiKsD0g
https://www.machinemart.co.uk/shop/...GS-040215184&gclid=CNO724em1McCFVdAGwodiKsD0g
Last edited:
