Retro fit reversing camera

Stickystuff

Registered User
Joined
Dec 2, 2012
Messages
226
Reaction score
42
Points
28
Location
Reading
My parking sensors where badly installed or tampered with to fit the tow bar wiring(by the previous owner). They e used scotch licks and so I’ve turned them off for now as they would glitch and the buzzer got annoying.

I’ve dine a search and when I take it apart and fix I properly I wanted to fit a reversing camera.

When I had my old B6 A4 someone did a retrofit on their cabriolet without using genuine parts. I wondered if anyone knows how I could achieve that on my A6?

I did a search but didn’t get any success with the C6.

Thanks
 
I was after aftermarket reversing camera myself but it turns out, A6 C6 is very demanding vehicle and will not allow it.
You need to go for a ganuine parts: camera in the tailgate, module, wiring and coding.
@B5NUT covered it in hes extensive thread of he's A6 rebuild. Very knowleadgeable guy who helped many reading it.
If not, ask @DJAlix. He's coding person and can advise from technical point.

Sent from my CLT-L09 using Tapatalk
 
What MMI system do you have fitted to your A6.
 
I have 3G +, I beleive. With a joystick

Sent from my CLT-L09 using Tapatalk
 
Sorry it was a question I was asking the OP, you beat me to being the second post as it were :)

You will have 3G in your C6, 3GP (+) was introduced into the C7.

For the Facelift C6 there were two options 3G Basic (SD card navigation) and 3G which was hard disk based.
 
  • Like
Reactions: KrisKrk