Please answer this FBMFSW help!!

[J999 RDS]

ive just bought this steering wheel,

I have a Audi s3 8p 2007 with a round non-mfsw.

I want to fit this in its place,

I understand I need the steering wheel module ending with F and the slip ring, once I have these parts how do I fit it and is there any threads on coding been looking for last 2 hours and all I can see is people asking and no one telling would be great if someone could help me out here ! And am sure you would be helping a lot of people out aswell as me thanks in advance hope someone can help I'm pulling my hair out at this

 

[J999 RDS]

Anyone I've got all parts here waiting to be fitted but I can't ???? As I don't know how

 

[euan_f]

no idea about the coding but for the fitting side of things here's the guide to the cruise control retrofit. it'll help you out a wee bit atleast (wheel needs to come full off just dont remove your stalks as you've gone too far).

http://www.audi-sport.net/xf/threads/cruise-control-retrofit-guide.111696/

 

[J999 RDS]

Thanks mate I know how to do that but it's just the coding

 

[craig205wrc]

Fit the steering ecu, slip ring and wheel then code the steering ecu as described >>>here<<<
Then perform basic settings and steering limit adaption as described >>>here<<<
Don't let it scare you, I fitted, coded and set up all the above and cruise control in just under 2 hours,
from start to finish the very first time I used my VCDS lead.

 

[J999 RDS]

Minted mate thank you very very much

 

[J999 RDS]

So this is coding in the multifunction aswell mate yeah ?

 

[craig205wrc]

Yes, you do that when you code the steering ecu

 

[J999 RDS]

Thanks bro Al let u know how I get on