Right, I'm on one now with my car niggles.
I need someone knowledgable with all the correct tools to 1. Fit a new injector loom that I have ready to go and 2. Verify that the injectors in my 170 TDI are set correctly.
The injectors were changed under the recall in 2012 but I'm now getting these intermittent faults:
004708 - PD Unit Injector: Cylinder 2 (N241)
P1264 - 006 - Regulation Range Exceeded - Intermittent
Freeze Frame:
Fault Status: 00100001
Fault Priority: 0
Fault Frequency: 43
Reset counter: 38
Mileage: 0 km
Time Indication: 0
Freeze Frame:
RPM: 1696 /min
Torque: 184.0 Nm
Speed: 93.0 km/h
84.63 %
Text: 5.000 uF
Text: 15.50 mJ
Text: 12 mJ
Voltage: 8.32 V
004705 - PD Unit Injector: Cylinder 1 (N240)
P1261 - 006 - Regulation Range Exceeded - Intermittent
Freeze Frame:
Fault Status: 00100001
Fault Priority: 0
Fault Frequency: 1
Reset counter: 38
Mileage: 0 km
Time Indication: 0
Freeze Frame:
RPM: 1504 /min
Torque: 0.0 Nm
Speed: 68.0 km/h
81.51 %
Text: 5.250 uF
Text: 16.00 mJ
Text: 11 mJ
Voltage: 8.32 V
I went to my "local" Diesel specialist and not only were they fairly grumpy with me (probably because I was armed with a bit of knowledge and a VCDS error log) but also achieved nothing and didn't have the knowledge I thought they would have...
So anyone used anywhere near me (North Yorkshire, preferably) that can offer an honest, competent service for this?
Not York Audi, obviously
I need someone knowledgable with all the correct tools to 1. Fit a new injector loom that I have ready to go and 2. Verify that the injectors in my 170 TDI are set correctly.
The injectors were changed under the recall in 2012 but I'm now getting these intermittent faults:
004708 - PD Unit Injector: Cylinder 2 (N241)
P1264 - 006 - Regulation Range Exceeded - Intermittent
Freeze Frame:
Fault Status: 00100001
Fault Priority: 0
Fault Frequency: 43
Reset counter: 38
Mileage: 0 km
Time Indication: 0
Freeze Frame:
RPM: 1696 /min
Torque: 184.0 Nm
Speed: 93.0 km/h
84.63 %
Text: 5.000 uF
Text: 15.50 mJ
Text: 12 mJ
Voltage: 8.32 V
004705 - PD Unit Injector: Cylinder 1 (N240)
P1261 - 006 - Regulation Range Exceeded - Intermittent
Freeze Frame:
Fault Status: 00100001
Fault Priority: 0
Fault Frequency: 1
Reset counter: 38
Mileage: 0 km
Time Indication: 0
Freeze Frame:
RPM: 1504 /min
Torque: 0.0 Nm
Speed: 68.0 km/h
81.51 %
Text: 5.250 uF
Text: 16.00 mJ
Text: 11 mJ
Voltage: 8.32 V
I went to my "local" Diesel specialist and not only were they fairly grumpy with me (probably because I was armed with a bit of knowledge and a VCDS error log) but also achieved nothing and didn't have the knowledge I thought they would have...
So anyone used anywhere near me (North Yorkshire, preferably) that can offer an honest, competent service for this?
Not York Audi, obviously