Hi all, I developed a p0016 code a week or so ago and have still not got to the bottom of it, so far I have changed both the cam and crank sensors with bosch ones, I have also checked the Cambelt timing marks, these look to be good. I also just changed the chain tensioner & chain, set the cams vertical and had to rotate the intake camshaft back a little so any slack is at the top. Still no improvement. Have checked the cam specified angle with actual and these are 28spec and actual 29-30 at idle.
Does anyone have any ideas where to go next or what else I can check?
Thanks in advance
Does anyone have any ideas where to go next or what else I can check?
Thanks in advance