Need advices : 19 wheels + lowering springs

[Tschill]

hello everybody,

I have an Audi A3 sportback 2.0 tdi 150 ambition ( standard -15mm chassis).
I would like to fit 19 wheels (new rs6 8.5x19 ET45 or 43)
For the tyres 225 35 19 or 235 35 19..

I found this example on a german forum, the car seems to be in H&R -40mm
It seems to be a little bit to low for a daily use..
Maybe eibach -30mm kit seems to be more appropriate.

Any advices or photos examples is welcome

Thanks

 

[Simon L]

hello everybody,

I have an Audi A3 sportback 2.0 tdi 150 ambition ( standard -15mm chassis).
I would like to fit 19 wheels (new rs6 8.5x19 ET45 or 43)
For the tyres 225 35 19 or 235 35 19..

I found this example on a german forum, the car seems to be in H&R -40mm
It seems to be a little bit to low for a daily use..
Maybe eibach -30mm kit seems to be more appropriate.

Any advices or photos examples is welcome

Thanks

.....looks bang on to me!! But hey, what I know about lowering springs you could write on the back of a stamp

 

[Schizophonic]

Here we go again.

19s running on 225 / 35. 8.5 ET45.

 

[Tschill]

Here we go again.

19s running on 225 / 35. 8.5 ET45.

Very nice concerning 19" what about the confort is it big difference with 18" ?
What type of springs have you fitted ?

 

[Schizophonic]

Very nice concerning 19" what about the confort is it big difference with 18" ?
What type of springs have you fitted ?

Not tried 18s over my original 17s. I dont have coils but have H&R Ultralows. Its rough and bumpy, scrapes on a put speed humps around town but I avoid them. The coils are on the highest setting and can go even lower! I have not tried to put it around the corners too much as the tyres are on the budget side which will need replacing next spring.