Up in the Air both wheels off ground
I dropped the rear exhaust hanger mountings to give an extra few inches to wiggle the old one out / get the new one in.
Mines a Facelift but same underneath at the rear.
Sent from my iPhone using Tapatalk
I have a H&R rear ARB to be fitted to my PFL and I didn't intend on lowering the car (springs) or adding wheel spacers.
I'm guessing part numbers would be the same for the RS3 8V FL or PFL then when it comes to rear ARB
The bar is great upgrade on stock or lowered suspension.
I went for a slightly softer bar, super pro, as I had the same concern about it being too lively in the rear, but its really not an issue, I'm now using the stiffer setting.Thanks for the feedback, there's no downside to this mod is there? Doesn't make the back end unstable in any way does it?
I went for a slightly softer bar, super pro, as I had the same concern about it being too lively in the rear, but its really not an issue, I'm now using the stiffer setting.
The rs3 always felt a little soft/floaty in high speed corners and perhaps the bar would make it looser in 4th gear corners, but I stay conservative when cornering high speeds.
You'll love it punching out of corners and round abouts it makes it feel solid and pointy.
Mine has around 20mm drop, which is a good compromise.