how does the grill part come off is it just clips that i pull and it will come out. dont want to just break it.
Cherrs Rob i have the s-line just didnt want to go in heavy handed and break anythingare you s-line bumper martin, if so the plastic surround just pulls outwards , there are two small tangs on top and bottom edges but you can just ping the cover off , very easy just put your fingers in through the bottom opening and lift /pull outwards , you can thing just manovuer the cover off.
Think so as in pull it up and awary from bumper and should pop out?The top edge fits into the bumper and then the bottom is retained by the tangs, so to get out, the bottom edge comes out first and the top will then drop down and pull it all outwards, hope that makes sense chap.
Well i gve it a go in the moring and shall see if manage it without breaking anythingI used a flat knife with masking tape on first time round martin , slid it in between the bottom lip of the cover and top edge of bumper and just carefull pushed the cover tangs up a bit so the bottom edge was no longer held in place then pulled the cover outwards.
Now its second nature and I can just pull it out in one go with the right angle etc .