Hi just wonders what values I should see at the plug to sensor all visually ok probe looks ok and no damage before I go buy a sensor wanted to check the wIring plug its 3 pin for I guess,
1) 5 volt supply
2) earth
3) return to ecm
Any advise would be good and if anyone has one would be better ,
Also has a fault code for turbo pressure valve mechanical fault but I do have holes in breather and air intake pipes so need to replace them aswell if any one has again I'm interested,
17861 exhaust temp sensor1
17608 boost pressure cont valve n249 mechanical malfunction
Also co%. @7.24
Hc@ 196ppm
Lambda@0.806. Limits are min 0.970. Max 1.030 so rich lambda sensor on diagnostic machine is switching open closed loop and was changed last yr
1) 5 volt supply
2) earth
3) return to ecm
Any advise would be good and if anyone has one would be better ,
Also has a fault code for turbo pressure valve mechanical fault but I do have holes in breather and air intake pipes so need to replace them aswell if any one has again I'm interested,
17861 exhaust temp sensor1
17608 boost pressure cont valve n249 mechanical malfunction
Also co%. @7.24
Hc@ 196ppm
Lambda@0.806. Limits are min 0.970. Max 1.030 so rich lambda sensor on diagnostic machine is switching open closed loop and was changed last yr