killa kombo
Registered User
Hi
In need of a little help, my 2.0 bkd having the symptoms above and the following fault codes:
--16685 - Cylinder 1
P0301 - 000 - Misfire Detected - Intermittent
Freeze Frame:
RPM: 798 /min
Torque: 60.0 Nm
Speed: 0.0 km/h
Load: 0.0 %
Voltage: 14.29 V
Inj. Quantity: 2.96 mg/str
Temperature: 10.8°C
(no units): 0.0
17055 - Cylinder 1 Glow Plug Circuit (Q10)
P0671 - 000 - Electrical Fault
Freeze Frame:
RPM: 882 /min
Torque: 90.0 Nm
Speed: 0.0 km/h
Load: 0.0 %
Voltage: 14.29 V
Bin. Bits: 00001100
Temperature: 11.7°C
Bin. Bits: 10110000
Idle stabilization (injection quantity deviation)
0.35mg/str injection quantity deviation 1
-0.54mg/str injection quantity deviation 2
0.28mg/str injection quantity deviation 3
-0.07mg/str injection quantity deviation 4
I am due to change the wiring loom and will put new seals on my injectors, from the info above is advisable to change injector number 1?
any help is appreciated
In need of a little help, my 2.0 bkd having the symptoms above and the following fault codes:
--16685 - Cylinder 1
P0301 - 000 - Misfire Detected - Intermittent
Freeze Frame:
RPM: 798 /min
Torque: 60.0 Nm
Speed: 0.0 km/h
Load: 0.0 %
Voltage: 14.29 V
Inj. Quantity: 2.96 mg/str
Temperature: 10.8°C
(no units): 0.0
17055 - Cylinder 1 Glow Plug Circuit (Q10)
P0671 - 000 - Electrical Fault
Freeze Frame:
RPM: 882 /min
Torque: 90.0 Nm
Speed: 0.0 km/h
Load: 0.0 %
Voltage: 14.29 V
Bin. Bits: 00001100
Temperature: 11.7°C
Bin. Bits: 10110000
Idle stabilization (injection quantity deviation)
0.35mg/str injection quantity deviation 1
-0.54mg/str injection quantity deviation 2
0.28mg/str injection quantity deviation 3
-0.07mg/str injection quantity deviation 4
I am due to change the wiring loom and will put new seals on my injectors, from the info above is advisable to change injector number 1?
any help is appreciated