AUDI A3 8PA 2010 Halogen to Xenon Conversion HELP!

[Nitro777]

Hey guys, i'm new here since i can't find any help i thought to adress it here.

I have an audi a3 8pa 1.6 TDI CAYC 105hp 2010, i have halogen headlights but i bough original HELLA made Xenon headlights and i want to fit them.
I know i need few parts, like the Kufatec adapters and coding.
I got the Xenon with AFS control unit mounted on them. Part number for the headlights is: 8P0941029AR

Do i need the Comfort convenience body module and how to check what part number is mine.

 

[NHN]

2010 will have the merged ce & conv module fitted ending with 063, so you'd need to check what the end letter is to be sure & check on the board pins to see if the bixenon etc connections are there if you want total peace of mind.

AFS won't work without the levelling module & associated bus wiring.

 

[Nitro777]

I have these fitted and the ballasts plus i ordered the kufatec adapters.
But where is the conv module location.

 

[NHN]

It's all detailed on the forum, you need to do some search & reading.

 

[Nitro777]

It's all detailed on the forum, you need to do some search & reading.

Yeah, but not everyone has a detailed work, just few here and there.
I just need the main things the other part coding and stuff i'll just drive my car into a shop.

 

[NHN]

Then read multiple threads as it's all there to take advantage of, no point writing it all again.

 

[Nitro777]

Then read multiple threads as it's all there to take advantage of, no point writing it all again.

It seems like i have the correct BCM Module already in m car. So now i just need the kufatec in right and coding.