I have all the necassery parts, i've pulled the Kuafatec loom from the trunk to the front towards the RNS-E
And connected it to the Media \ Video source behind the RNS-E.
My question is there are 4 cables (4 different colors) that come out of that same wiring loom,
and i'm not sure what to do with them.
According to the german manual I have it's related to CAN-HI and CAN-LO, but I didn't understand whether I should splice into the OEM wiring loom's cables using those mentioned above cables, or what to do with them.
I've added pictures of the wiring loom i'm talking about (you can see the cables in the picture)
And i've added a picture of the "installation manual".
And connected it to the Media \ Video source behind the RNS-E.
My question is there are 4 cables (4 different colors) that come out of that same wiring loom,
and i'm not sure what to do with them.
According to the german manual I have it's related to CAN-HI and CAN-LO, but I didn't understand whether I should splice into the OEM wiring loom's cables using those mentioned above cables, or what to do with them.
I've added pictures of the wiring loom i'm talking about (you can see the cables in the picture)
And i've added a picture of the "installation manual".