RNS-e 32 pin connector

M

millinb

Registered User

Joined

Jun 2, 2015

Messages

15

Reaction score

3

Points

3

Location

Portsmouth

• May 13, 2019

• #1

Hi looking to add an camera to my A3 2010 and have C1C-M01 multimedia unit and its missing some cabling, I have the power connector and have the input/outpins to go to the 32 pin connector on the back of the RNS-e but have no guide as to what these are and to which I use or not.
Does anyone have a diagram or knows what these pins are,
Many thanks in advance

 

LEE69

07 170 DSG

Joined

Jul 30, 2013

Messages

3,275

Reaction score

661

Points

113

• May 13, 2019

• #2

This should help https://www.audizine.com/forum/showthread.php/265957-RNS-E-amp-Rear-View-Camera

 

M

millinb

Registered User

Joined

Jun 2, 2015

Messages

15

Reaction score

3

Points

3

Location

Portsmouth

• May 13, 2019

• #3

Thanks for the link but no info on the 32 pin connector on the RNS-e which is what I'd like.

 

LEE69

07 170 DSG

Joined

Jul 30, 2013

Messages

3,275

Reaction score

661

Points

113

• May 13, 2019

• #4

Look at the picture bottom right

 

M

millinb

Registered User

Joined

Jun 2, 2015

Messages

15

Reaction score

3

Points

3

Location

Portsmouth

• May 13, 2019

• #5

Thank you, the picture shows the 32 pin connector but nowhere does it give the following information
Pal/NTSC
Video ground
Csync
Video on
Component Video etc
These are some of the pin requirements I'm looking for