Find a way through

leonwilliams · Mar 4, 2018

Hi I need help trying to find a way through the sill. For a project I'm doing led scuff plate lights.

I've got 2nd hand scuff plates cut them to fit the leds. But struggling to find away through the sill into car to run wires unseen any help appreciated.

I have already drilled a small hole used a torch at night. No light emitting through. I have my original plates with the aluminium insert will re-do using these once it's all up and wired right. Also fitting front footwell lights at same time..

Sent from my SM-G935F using Tapatalk

Marek196c · Mar 15, 2018

go along the side till the door loom isn't an option?

leonwilliams · Mar 15, 2018

Marek196c said:
go along the side till the door loom isn't an option?

No mate I eventually found a way yo run the wire through the sill and back into the car unseen

Sent from my SM-G935F using Tapatalk

leonwilliams · Mar 15, 2018

leonwilliams said:
No mate I eventually found a way yo run the wire through the sill and back into the car unseen

Sent from my SM-G935F using Tapatalk

Took some doing

Sent from my SM-G935F using Tapatalk

leonwilliams · Mar 15, 2018

leonwilliams said:
Took some doing

Sent from my SM-G935F using Tapatalk

This is a test run. Got another set of custom made led plates coming going to do it all over again.

Sent from my SM-G935F using Tapatalk

Marek196c · Mar 25, 2018

use different connectors, water tight not for domestic electrics.
Like this:

or another style that will be waterproof.

Find a way through

leonwilliams

Registered User

Marek196c

Gilera Runner / A3 Sportback

leonwilliams

Registered User

leonwilliams

Registered User

leonwilliams

Registered User

Marek196c

Gilera Runner / A3 Sportback

Similar threads