1.8T Crank sensor wiring

[jimmcgee]

can anyone give me a picture of the three wires going into the plug on the bulkhead side , ie ,

some fud , ME !! , has pulled the 3 wires out of the plug aaaahhhh , the rubber boot lifts back , now have a new crank sensor in place and 3 flooking loose wires .

 

[jimmcgee]

right ! , took my life in my online hands and fired up the old xp laptop with elsawin on it

got to be someone else who will need this , or am I just an fudd lol

pin 1 is black pin 2 is blue pin 3 is gray , the numbers are on the gray plug , now just need to work out how to get the wires back in the plug hahah

 

[jimmcgee]

this newfangled internet this is amazing

 

[jimmcgee]

top tip , use a magnetic bit for replacing the bolt in the crank sensor , it will and I mean will fall into the only hole in the cross-member
lucky I had some nija hard disk magnets to grab it out