Hi all… I’ll keep it as short as possible, my wife has an 06 A3 and the PCV has failed (leaking boost) I’ve confirmed it is the problem through all kinds of posts here and other places, as well as learned how the whole fancy PCV system works on this engine. My question is this, I’m a diesel guy...
Hello everyone
I’m after opinions and advice on the situation i have here...
I own a 2006 Audi A4 2.0T Special Ed Quattro with the BUL 220bhp lump and i had the dreaded low oil pressure and it done a good number on my engine. :pensive::pensive:
So i had it rebuilt at a cost of £2,000 by a...
Hi, I’ve seen the PCV blanking plate “delete” for the 2.0TFSI but was wondering if there is a similar mod for the 1.8TFSI?
The reason I ask is that recently I had the rear crank seal replaced as it was leaking and causing a miss and I understand that a faulty PCV can blow seals etc. I’m not...
Hi, I’ve seen the PCV blanking plate “delete” for the 2.0TFSI but was wondering if there is a similar mod for the 1.8TFSI?
The reason I ask is that recently I had the rear crank seal replaced as it was leaking and causing a miss and I understand that a faulty PCV can blow seals etc. I’m not...
Hello All,
Just after any info or experience anyone might have.
Anyone using the R-tech PCV delete with a catch can?
If so how do you find it/ how do you have it set up... I note the instructions said one could be used, but no indication how... in my mind it being a bit different to a normal...
Hi.
Have recently completed a full SAI and PCV delete and as per various instructions, connected a line straight from the rear of the rocker cover to the brake servo.
Brakes are working okay but am wondering whether I should be putting a non return valve in the line to stop boost from entering...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.