Ive seen a few other threads/posts on here about disabling the OBD by simply removing 2 fuses, but these are all for the prefacelift S3 not the post 2016 8V.
Can anyone tell me which fuses need removing from the S3 8V please? (PM so not to make the info public)
I'm looking to run the Torque Pro diagnostic tool with a bluetooth OBD scanner and before I had a go at coding it myself, I was wondering if anyone had any audi PIDs for the app? Preferably in the form of a .CSV so I can hoof it straight into the Torque directories.
My first post on here. I was hoping for some advice on scan tools
I'm going to replace my abs pump due to a goosed pressure switch. (Cheaper to change the whole pump)
I've got a cheap bluetooth scan tool but I'm looking for an upgrade that will scan and activate the abs pump to...
Picking up an S3 Faceflift 3 door hatch on Friday.
Its got the advanced key. Im a bit worried about how secure these are and what I can do to help reduce the chance of it going walkabout!
Ive looked through the forums and can anyone give me some advice on what to do.
Im going to...
A little back story, I got a 54 plate A3 3.2 V6 which had a Straight Pipe exhaust just recently and when I bought it and drove it home there was no error codes/fault codes. I recently then drove the car again for a much longer period of time and on the way home some the check Engine light came...
I am selling my bluefin that was used on Audi A6 2.0 TDI ultra 190ps, and has been reset ready for new map to be provided FOC by SuperChips
They sell for £499. My Buy it now is £249.00, but would sell to forum member for £200
As per my auction, you need...
Hello All! I've been trying to figure out a way to get two devices to talk to the OBD port, which is technically impossible the way it works. JB4 is currently hooked up permanently to the car so I've been trying to figure if there is a way to use a spare OBD device to get data directly from the...
Managed to get the old vagcom firing on the laptop, I have pulled these codes with the ignition on and map sensor and throttle body unplugged, the EPC light was initially on before i stripped it down to replace rocker gaskets and clean some components.
Any experts out there, or am i best doing...