Search results for query: *

Are you referring to FIS/cluster options configurable via MMI? If so - after 3GP retrofit that option is not existing so nothing to worry about. Sent from my iPhone using Tapatalk

Yeah you will need get rid of BEM on the back, run cable From pin2 of your gateway to the battery with new “minus” clamp to pin1. Elsawin will tell you the details but surely you need a single wire from pin2 GW to your boot and take it from there. No wiring change on generator itself. Just a...

That’s correct and v6 engines needs entire generator swap. For 2.0 R4 just regulator will do. This is due to different construction of the alternators. Sent from my iPhone using Tapatalk

This AMI is for mmi2g system. You need Ami for 3G which is pretty much cable with socket being connected to quad lock of the back of your mmi. Good news is that this Ami you have is much more expensive than 3G Ami so you should get your money back. 3G Ami has no most connection. Link as...

RHD = Right HAND drive which is UK car - driving on the left side of the road LHD = Left HAND drive which is all other EU countries where driver seats on left side of the car driving on the right side of the road. You need RHD headlights in UK mate. Wiring non-xenon to xenon needs another...

Looks like your BT is cradle version so check your middle armrest for it. It’s not too difficult to get that sorted . I am afraid that with this setup you won’t be able to connect your iPhone without changing your module to the “wireless” one which should be plug and play. Wait for others to...

I would be tempted to say it’s more wiring issue somewhere- loose connector etc. It’s pain but take this off and make sure all of the connections are right n secured . Sent from my iPhone using Tapatalk

Was there any retrofits of any of the mmi components done recently ? Sent from my iPhone using Tapatalk

Hi , First of all your mmi 2g high control head need to have a FBAS plug(green one) for video which I doubt if there is no PDC installed. Regarding PDC modules : - you can install 8 sensor one and code it for front only -you can get 4 and 8 sensor one without camera support ( so pay attention...

I replied to your messages weeks ago mate on priv. 4H0035670P Sent from my iPhone using Tapatalk

Update: Managed to get the car to see SIM cards (size doesn’t make any difference on a8 unit so nano can be also used via adapter). I used the same SIM cards on other c6 with 3GP which also I was installing the same way as on my car and they all seems to be ok : My car however is struggling...

That’s the one I have. 4 sensors + visual on MMI. I had to replace it only due to installing rear view camera (this one doesn’t support RVC but it does what you are after and coded to display visualisation on the mmi screen) This is one digit change job in coding btw:) Regards Dawid Sent...

It might be on the left on saloon but won’t be visible until you take boot flooring off. Check right side first. What do you need to do with it? If you need rear sensor PDC module PM me. Dawid Sent from my iPhone using Tapatalk

Genuine OEM 2g Bluetooth unit with antenna. Taken from my own car. Need parts gone ASAP due to space constrain . https://www.ebay.co.uk/i/182831076944 Cheers , Dawid Sent from my iPhone using Tapatalk

Going to “car” then setup and scroll down. It should be version info. Sent from my iPhone using Tapatalk

Ok so I installed nano sim with adapter with no luck. Second step was to put lebara sim (normal size with bigger chip) however is still not recognising it. In green menu signal shows (from antenna) 255. Any clue ?:) Sent from my iPhone using Tapatalk

Thanks for help. Did anyone get the nanosim on adapter working ? I haven’t tried yet but I believe the chip is a bit smaller . Sent from my iPhone using Tapatalk

Hi I am wondering what sim card / which provider to you guys use for your 3GP units? What’s the data consumption on it? Advise would be much appreciated. I am hunting one at the moment as just plugged the gsm antenna and so I am very curious to see how does the thing work. Cheers Dawid...

Same question here :) waflgaz, this is stunning mate! Sent from my iPhone using Tapatalk

I think that's what's forum for- to share knowledge. I wouldn't say you would hijack someone thread as there was plenty of people doing the retrofit with different experience therefore new thread wasn't really necessary. Radio tuner is p&p including plugs. Aerial needs to be changed for DAB...