have you replaced the one way clutch bearing on the alternator . if not thats your problem with alternator jammed inside the pully should turn one way if not it needs it replacing
the easy way to find out is take belt off and stick something in alternator to stop it turning and get hold of pulley and it should still turn one way if its stiff or wont turn then it needs a new one but it should freely move one way with alternator jammed
the easiest way to find out if its one of the injectors is to unplug 1 injector at a time and try and start the car if the car starts thats the faulty one if not plug that bk in and unplug the next one.if the faulty injector is plugged in it is built in to the ecu to cut the engine thats how i...
no need to remove front end for clutch pulley just remove alternator easy job .buy new alternator pulley and take it to a garage or auto elec garage they will change it then fit alternator bk on
yes its a shame i first wanted bigger but not over the top but these cost me £3 each from china but were only bought to test for size comparison and they have not gone rusty after 3 mth so i am keeping them now cant go wrong for the money they cost me
these are the one's i put on my car standard bumper sline 170 they fit perfect - the oval trim inside i striped these down and removed that and welded them back together they are just cheapies of ebay but looked good so i left them on but thats the size you can go to on the standard bumper
the easiest way of checking if its alternator one way pulley is to remove belt and put one finger or any thing in the alternator to stop the inside from turning and turn the pulley it should freely move one way if not then needs replacing no need to remove bumper just remove the alternator and i...
finally got the correct harness and headlights work as they should thanks for the help and managed to get all my money bk of the first harness and gave me more money bk than it cost to post bk and the new one was cheaper so win win
no have not bother'd with pulling the yellow wire though yet as that is for the high beam switch and it is not the right harness i got off ebay as they all have the yellow wire on them even if it is for b6 or b7 defo sent wrong cable nothing works at all with this harness apart from the side...
as you can understand my head is mashed :tearsofjoy: they all say fit b7 and b6 so confused at witch ones to buy just dont want to wast any more money it would be a lot of help even if its just for the part no thanks
had a good look on ebay for the right harness but even tho they state b7 most say in compatible cars they still fit a b6 so im getting confused :tearsofjoy: even the ones you pointed out to me say it fits a b6 if you understand me thanks again :sos:
I'm not giving up if they don't reply this time as I stated in the 2 emails I sent them I will open a dispute with PayPal but on the add it never mentioned b6 or I would not have bought them but thanks for all your help
Hello I orderd b7 to b7 that is what they sent me I dident think it was the right one I contacted them straightaway but got no reply but I'm not giving up thanks
hello got new harness and it turns out it is the same as i already have so a waste of £40 both harnesses are identical tried to change software coding again to 00021 but nothing changed the only thing that changed was with 00021 when i turned ignition off the ignition stopped on and the side...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.