Hi Daniel,
Sorry for the late reply , i went to the dealer to have the CP removed , it was not possible any other way because from all the research I have done online i came to the conclusion that the Audi server has to approve the components to match.
bbpc3 i think mine was 21055 or 20155 but i believe each one has a unique code , not sure though.
There is an option in VCP that will search for it , it takes a little time though.
It doesn`t affect anything as far as i could tell , the fault shows up when i scan the MMI 5F.
Maybe the battery in the key fob or the garage door opener , but don`t have that option on the car.
Could somebody help with this fault , goggle doesn`t bring up much info.
02257 - Remote Control Receiver
014 - Defective
Freeze Frame:
Fault Status: 01101110
Fault Priority: 5
Fault Frequency: 28...
The problem wasn`t the baud rate but the board was faulty , so instead of taking my chances on another unit of ebay , i found brand new bare boards on Alibaba for $86 shipping included.
I finally got rid of the blind menu by the eeprom way with VCP , figured out later that it can be done with otis if you have the security code, oh well added another cable to my collection.
Anyway i decided to complete the project and get a control panel with the mouse(high).
Found one on ebay...
New problem , every time i load the North American firmware the menu gets all screwed.I am trying to find a newer firmware with no luck , not much out there for North America.Any idea what would cause this?
I went to the dealer and removed the CP and everything worked fine but the sound controls like the treble bass and sub would reset every time i would restart the car.So i updated the North American version for the firmware again but now my Nav data is blocked.I don`t know how a firmware rewrite...
Component protection is still there , i think that is the cause of the problem too.
Also when i turn the volume up on the ent fader , it`s not as loud as it was before.
I do have VCDS.
Funny thing is when i go into the sound menu and adjust in car entertainment fader the sound works.
As soon as i leave that menu it stops.
Thanks for the reply B5NUT but my control panel doesn`t work and the bite 14 trick is a no go so i am stuck again.
This unit being a 4E0 035 666 F only has 18 bites of coding.
Also would you know the pin layout for the 8 pin connector of the LVDS , i think only 2 pins are used.
I finally was able to load a firmware but it only accepted HNav_EU_K0031_3_D1 so now i have to figure a way to load a North American firmware if possible.
What is the baud rate on this unit?
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.