Yeah manage to find it thanks. Successfully enabled subwoofer on my B9 A4 MHS2 and I’m chuffed to bits. I’m impressed with the car scanner app as well having used OBDeleven and Carista. I’ve also previously swapped out the stock non B&O sub with my own separate amp and sub and it makes a big...
Hi Guys, how do I enable experimental features on the car scanner app? I’m using on iOS. Also, which connection method should I use as there are loads of options….
cheers
Hi Guys,
Ran vcds lite and got the following from a module 17 scan:
Module 17 stated: 00688 supply voltage terminal 30
53-10 supply voltage to low intermitent.
also gt the following from a full scan:
VCDS-Lite Version: Release 1.0
Tuesday, 04 March 2014...
Hi All,
Something really strange has started happening on my A3 8L 110 SE. At the moment its quite cold where I live and in the morning when I start the car after its been sitting all night the millage, clock and date keep resetting on the instrument cluster. Its only ever when the car has been...
Hi all,
Can anyone Confirm the correct a exhaust sleeve size for my a3 8l tdi?
Exhaust sleeve from the cat to the middle section is perished and needs replacing bit there are 2 different sizes:
49.5mm-54.5mm
55mm-60mm
Thanks
Ok, now I have another problem :/ attempted to bleed the brakes after the caliper change but I can't loosen one of the bleeders..... To the point where it's rounded of the bolt head for it :/
How am I going to get this bleed valve open?
Any suggestions are welcome.
thanks
Hi Guys,
Hope I can get a quick answer from the experts in these forums.
So here's the story:
Went to change my rear pads and discs on my 2001 A3.
When I finally managed to get the Pads and Discs off the Caliper Pistons for both sides where Seized!
Thankfully I managed to pick up a couple...
so in your experience would you say im better off leaving it at stock height or lowering it? if so how much should i lower it by so that it looks good but is minimum fuss.....
Hi all,Had a quick search but couldn't find a definitive answer.Would 235/45/17 audi TT wheels and tyres fit ok on my A3 8L?PCD is 5x100 so I know that's ok, I'm more concerned about rubbing etc etc...Thanks!
hi all,
have searched the web and old threads for this question but found nothing.
would a bonnet and tailgate from a 5 door a3 SE fit on a 3 door? both are 51 plate.
is the tailgate the while boot or just the bumper?
thanks
HI all,
I have some audi a4 17 inch alloy wheels that i want to fit to my 2001 A3.
My question is will they fit?
Fronts are: 235/45/zr17
Rears are: 245/45/zr17
I currently have 165/45/r15 on.
Thanks!
So I have replaced the vac lines and the n75.... Still getting limp mode with the 1 code: 17965 :/
Something else just happened an it's the first time it's done it. Started the car from cold pretty much and had it running while i de-snowed (been snowing here). About a mile down the road it...
So a mechanic friend told be to clear the codes and drive around until it hits limp mode again, then do another check:
Here's what I got....
17965 - Suspect N75 valve, have just been to parts specialist to pick up a new one, its also worth noting that the mass air flow sensor was replaced by...
Thanks for the quick response Paul_TDi
Not all of the Vac lines have been replaced yet, i will certainly do that - Oh good please do let it be the turbo :/
Would any of the issues you have listed above contribute to poor fuel economy then?
The car is a 110 SE <---- im not sure if that helps...
Hi all,
I hope you can help :(
I have just bough a 2001 a3 1.9 TDI, the issue i have is that the car goes into Limp mode at around 3000 RPM reguarly and i cant figure out why? i have also used almost a quater of a tank of fuel and i have only done 40 miles on very sensible driving!
I have...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.