Search results for query: *

i have a 3.0 tdi quattro with propshaft part number 8e0521101r does anyone know if 8e0521101d is compatible? Thansk

I have an intermittent idle issue where it feels like a missfire, I have read about measuring blocks 72-77 but not sure on how to read the data, can anyone help? sorry for the sideway pictures.

Hoping someone might be able to help, I have a 2005 3.0 tdi quattro and it has an intermittent rough idle, doesn't smoke just feels like its missing, drives absolutely fine and no fault codes on VCDS, any ideas or any tests i can run on VCDS? 2nd fault is when its warm and pulling out of...

i have a 2005 A4 3.0 tdi quattro and the front pinch bolt has completely seized, I’m going to get another alloy upright/carrier? so I can replace it, I can’t find a part number and what other variants share the same part? Thanks

Having a couple issues drag racing my car, was very difficult to change gear quickly and the whole thing was really sloppy, had the engine out fitting a paddle clutch and change the mounts and it was easy to see what was the issue

are there any bolt in sub frames for the b5 a4 for bucket seats? Or how have people done theirs? Thanks

has anyone got much experience with drag racing, launching really? I have a 1.8t quattro and did my first drag day recently, got a 13.5 @ 109.6mph am quite happy as we had 40mph headwind but I am sorting my clutch as it either bogs down or slips. Got a paddle clutch on its way, anyway question...

I have a 1999 1.8t quattro with a bit of gearbox slop, i have a poly snub mount and v6 engine mounts and was wondering if the 2.8 or s4 mounts are the same or firmer and if they fit the 1.8t?

Hi, I have a 2008 1.6 petrol engine code BSE, it has this crazy problem in 2nd gear, you can pull away normally in 1st, change to second gets about 2k and then hits a wall, if you keep your foot down then dip the clutch it then goes as it should, so far I have done this: Checked with vcds - no...

Does anybody know a good tool to lock the crank to so I can torque the bolt up please, ajl 1.8t. Cheers

Hi all, do you know if the apu bottom end is the same as the ajl and aeb? I know they are dbw and small port but are they the 058? 20 mm rods? Cheers

Hi, does anyone have a wiring diagram for a AEB ecu, mainly need the following pin numbers for: TPS CTS Injectors IAT Thanks for any help

I have a 2008 1.6 petrol with a noisy gearbox, its a JHT code, will a LVN work or any other codes work? Thanks

Anyone know what the capacity is on a facelift screen wash tank please? No headlight washers if it makes a difference? Cheers

can anyone please help, I want to do the rs4 clutch on my 1.8tqs, I have the ttv flywheel, will the rs4 clutch fit directly on? Also someone mentioned the flywheel bolts maybe different, can anyone confirm what bolts I need for this? I assume while the flywheel is off its worth doing the main...

I have had my A4 a couple of weeks, I bought it cheap as their were a few issues but having it in my mind im going to rebuild I was too worried, One of the issues was the turbo was not boosting, but having a turbo from my last toy (360bhp volvo 850) it was fine, anyway heres why the turbo...

8d0 907 558 DA is in my AJL 1.8t, is this flashable? If not are there any that are straight swaps that are flashable? Thanks

Is there anything different with an AJL engine, when looking for rods I can't seem to find ones that have that code, are they all the same? Any ones to avoid? Cheers

I've done some searching and it all seems to be in the states, I have a 99 a4 tqs, I am fitting a gt2871 turbo and need help with mapping, the big turbo file I've seen looks like it would be OK, anyone using this or any other options, spoke to my local vag tuners and they don't touch the drive...

Hi, can anyone recommend a good intercooler kit for a 1.8TQS? seen some that have 2" pipework, going to be running a gt2871r and the ones i've seen have 2" pipework, that has to be too small i think? Cheers