While most of the motor is at the machine shop I'm working on other items, next up is the turbo. I have a k03s, I think. The plate on the turbo is too far worn to read but since this is a 2001 a4 sport rated at 170hp I think it has a k03s instead of a k03.
The exhaust housing has some cracks...
Finished the measurements on the block/head.
Everything is flat as far as my 0.002" feeler gauge and mechanics ruler can determine. All the bores are within the round/taper spec.
I wasn't confident in my ability to use a telescoping bore gauge so I kept taking measurements over and over until...
Took a pic of what I think you're after, I have the AWM (2001) and this 2000+ diagram has been useful.
#155 in diagram below (near lower left) is the cam position sensor
I have the AWM (170hp) and your AJL (180hp) probably came after?
Edit:
Looks like this is AEB head with the AJL, here is...
You're probably right, all the hoses are in pretty bad shape and I'm going to replace all of them. There is so much oil on everything its hard to pin point any specific location. I'm going to have to do a lot of repair on the ECU wiring harness across the board so definitely looking at how to...
I started off running a compression check, 1 and 4 jump up to 160psi pretty quickly, 2 and 3 slowly get up to 120. The connects for the coil pack were very brittle and two of them fell apart when unclipping even while using a special tool for these connectors. I bought an ignition wiring kit...
Hey,
New here but found two really good build threads by olds_kool and Moniek88 and thought it would be fun to post my progress and get feedback along the way.
This is my first complete build so things are going slow as I read through forums/bentley/haynes/you name it.
The goal for this car...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.